Gil,

     I don't think you'll find such a file. Network Node Manager is able to
     read any TRAP-TYPE directly from the MIB file and insert it into
     trapd.conf during MIB load. For NetView you'll have to configure HP
     traps manually


     - Michael.


______________________________ Reply Separator _________________________________
Subject: Re: HP-UX 10.20 Traps -Reply
Author:  Non-HP-IRIZARRG (IRIZARRG AT LABS.WYETH DOT COM) at HP-Belgium,mimegw3
Date:    08-12-98 17:51


Michael:
  Thank you for the mib. I did have the mib however.
 I am looking for a trap file similar to the one Cisco provides for all of its d
evices.
I would use the "addtrap" utility to add it to the /usr/OV/C/conf/trapd.conf.
Thanks in advance.
Gil Irizarry

>>> <MICHAEL_IMHOFF AT HP-Denmark-om1.om.hp DOT com> 12/08/98 10:48am >>>
     I'm not quite sure if this is what you need. I have attached the HP-UX
     MIB file.


     - Michael.


______________________________ Reply Separator _________________________________
Subject: HP-UX 10.20 Traps
Author:  Non-HP-IRIZARRG (IRIZARRG AT LABS.WYETH DOT COM) at HP-Belgium,mimegw3
Date:    08-12-98 15:31


Hi All;
  I need to manage HP-UX servers. Please let me know the FTP site for down loadi
ng HP-UX traps for AIX 4.2.1 NV 4.2.1. Any Help would be appreciated.
Thank s in advance.
Gil Irizarry