Re: Netview MLM configuration

1998-08-18 02:24:27
Subject: Re: Netview MLM configuration
From: Adibah Mohamed <bmadibah AT NCS.COM DOT SG>
To: nv-l AT lists.tivoli DOT com
Date: Tue, 18 Aug 1998 14:24:27 +0800
Thanks Joel & James....

  I think the problem I have with the "session to node" down is minor
because I notice that if I don't use the Alias name (which is defined in
the Alias Table) but use the specific IP address instead, I am able to
collect stats.

  the biggest headache I have right now is that the MLM stores all stats
collected in one file.


Joel A. Gerber wrote:
> The error message mentioned in item (ii) below is an indication that the MLM
> system has lost connectivity to a node that is collecting SNMP data from.
> Make sure that you are running the snmpwalk from the MLM system, and not the
> NetView system.  Running snmpwalk from the NetView console only checks that
> the NetView server has SNMP connectivity.  You need to run snmpwalk from the
> MLM server to determine if it has SNMP connectivity to the node.  Another
> possibility is that there was an intermittent timeout, and when you ran the
> snmpwalk everything was fine.  Check the SNMP configuration either in
> NetView or MLM, and make sure that the SNMP retries and timeout are "long
> enough" to avoid timeouts on the SNMP get requests.
>         -----Original Message-----
>         From:   James_Shanks AT TIVOLI DOT COM [SMTP:James_Shanks AT TIVOLI 
>         Sent:   Friday, August 07, 1998 14:58
>         To:     NV-L AT UCSBVM.UCSB DOT EDU
>         Subject:        Re: Netview MLM configuration
>         I don't know the answer to number ( ii ); perhaps someone else does.
> If
>         not, then please open a call with Support.
>         But ( i ) is the way MLM works.  It  will only discover nodes on its
> own
>         subnet.  You can modify the collection it creates to add some new
> nodes or
>         subnets to the polling it does, but discovery is limited to its own
> subnet.
>         Have you read all the MLM documentation?
>         James Shanks
>         Tivoli (NetView for UNIX) L3 Support
>         Adibah Mohamed <bmadibah AT NCS.COM DOT SG> on 08/05/98 10:15:43 AM
>         Please respond to Discussion of IBM NetView and POLYCENTER Manager
> on
>               NetView et alia <NV-L AT UCSBVM.UCSB DOT EDU>
>         cc:    (bcc: James Shanks)
>         Subject:  Netview MLM configuration
>         I'm having some problems with my MLM...
>         (i)  I'm only able to discover nodes in the segment which my MLM is
> in.
>         (ii)  For data collection, I get the error indicating that the
> "session
>         to node is currently down" even though I have no problems doing an
>         snmpwalk from the console to get the MIB variable values.
>         Adibah Mohamed
>         NCS

<Prev in Thread] Current Thread [Next in Thread>