Hi Jerald,
With 8.1RC1 and LTO4, it works well .
Can you try with LTO4 ?
Gilles.
De : veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] De la part de Iverson, Jerald
Envoyé : mardi 7 août 2012 17:24
À : VERITAS-BU AT MAILMAN.ENG.AUBURN DOT EDU
Objet : [Veritas-bu] ndmp drives down after netapp upgrade to 8.1.1RC1
we have a netbackup 7.1.0.3 environment, linux master/media servers. after upgrading 2 netapp fas3160's to 8.1.1RC1, the direct attached (thru a san switch) lto5 tape drives went down, and go back down after "up'ing" them. 1 netapp has 1 drive, the other has 2 drives, and all 3 went down and stay down. from the first filer i see the tape drive:
fas3160e> ndmpd status
ndmpd ON.
No ndmpd sessions active.
fas3160e> storage show tape
Tape Drive: ushouebs9148a:1-9.126
Description: IBM LTO 5 ULTRIUM
Serial Number: F001B2B013
WWNN: 5:003:08c001:b2b013
WWPN: 5:003:08c001:b2b014
Alias Name(s): st1
Device State: available
fas3160e> sysconfig -t
Tape drive (ushouebs9148a:1-9.126) IBM LTO 5 ULTRIUM
rst1l - rewind device, format is: LTO-3(ro)/4 4/800GB
nrst1l - no rewind device, format is: LTO-3(ro)/4 4/800GB
urst1l - unload/reload device, format is: LTO-3(ro)/4 4/800GB
rst1m - rewind device, format is: LTO-3(ro)/4 8/1600GB cmp
nrst1m - no rewind device, format is: LTO-3(ro)/4 8/1600GB cmp
urst1m - unload/reload device, format is: LTO-3(ro)/4 8/1600GB cmp
rst1h - rewind device, format is: LTO-5 1600GB
nrst1h - no rewind device, format is: LTO-5 1600GB
urst1h - unload/reload device, format is: LTO-5 1600GB
rst1a - rewind device, format is: LTO-5 3200GB cmp
nrst1a - no rewind device, format is: LTO-5 3200GB cmp
urst1a - unload/reload device, format is: LTO-5 3200GB cmp
from the media server:
ebsmd1# tpautoconf -verify fas3160e
Connecting to host "fas3160e" as user "root"...
Waiting for connect notification message...
Opening session--attempting with NDMP protocol version 4...
Opening session--successful with NDMP protocol version 4
host supports MD5 authentication
Getting MD5 challenge from host...
Logging in using MD5 method...
Host info is:
host name "fas3160e"
os type "NetApp"
os version "NetApp Release 8.1.1RC1 7-Mode"
host id "0151736859"
Login was successful
Host supports LOCAL backup/restore
Host supports 3-way backup/restore
ebsmd1# tpconfig -dev_ping -drive -path /dev/nrst1a -nh fas3160e
Failed to inquiry the specified device.
ebsmd1# tpconfig -update -drpath -path /dev/nrst1a -nh fas3160e -asciiname adic_drv03 -drstatus UP
Device serial number for device at path /dev/nrst1a does not match drive adic_drv03.
ebsmd1# tpconfig -l
Device Robot Drive Robot Drive Device Second
Type Num Index Type DrNum Status Comment Name Path Device Path
robot 0 - TLD - - - - /dev/sg11
...
drive - 3 hcart 4 DOWN - adic_drv03 /dev/nrst1a
...
does anyone else have a setup with netapp ontap 8.1.1rc1 working? we have 12 other netapps at lower ontap versions that still work. i think i found a compatibility chart that says it is supported.
thanks,
jerald
****************************************************************
Confidentiality Note: The information contained in this
message, and any attachments, may contain confidential
and/or privileged material. It is intended solely for the
person(s) or entity to which it is addressed. Any review,
retransmission, dissemination, or taking of any action in
reliance upon this information by persons or entities other
than the intended recipient(s) is prohibited. If you received
this in error, please contact the sender and delete the
material from any computer.
****************************************************************