Sounds like a barcode rule is setting it to the wrong media type.
If your tape type is HCART then the tape would need to be set to HC_CLN or for HCART2 would need to be set to HC2_CLN.
Right click on the robot>inventory robot> Advanced Options>barcode rule… the one problem is this is a global setting.
After making the changes delete the cleaning tape from the robot and then re inventory.
Dan~~
|
|
Please
consider the environment before printing this email.
|
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu]
On Behalf Of Lightner, Jeff
Sent: Monday, February 27, 2012 9:29 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] vmchange CMD on NBU 7.0 - change Media Type
Is the media actually seen as NU01L1 or just as NU01 in your media list in GUI? All of our cleaning tapes are CLN###L4 on the label but the L4 is smaller text
and isn’t read as part of the media ID when inserted so they become only CLN###. I’m wondering if this isn’t the same for your L1?
If you run “vmquery –m NU01” does it show you anything? “vmquery –m NU01L1”?
What does the Cleanings Remaining output of the vmquery done shown? Is it 0 by any chance?
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu]
On Behalf Of Simon Weaver
Sent: Monday, February 27, 2012 6:36 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] vmchange CMD on NBU 7.0 - change Media Type
Environment: One Master 7.0.1 and 2 Robots (LTO3 HP ESL and LTO4 SL500).
I must be having a daft moment, but I loaded a cleaning tape in slot 1 of the robot, its seen as a cleaning tape LTO4 in NetBackup 7.0.1
C:\Program Files\Veritas\Volmgr\bin>vmchange -h <Master> -new_mt hcart_clean -m NU01L1
It looks like a cleaning tape, but from Activity Monitor, if I right click a drive and click clean now, I get this:
Following error occurred while attempting to clean drive <LTO4-Drive> on <Server>. Daemon failed accepting connection (59) and I get a job in Activity Monitor with status
96, which indicates cleaning media not avaiable.
Any ideas where I can look.
Athena®,
Created for the Cause™
Making a Difference in the Fight Against Breast Cancer
How can I show my support for bottled water?
Take a minute to sign a petition in support of bottled water. Your signature COUNTS! Available through the
bottledwatermatters.org/luv-bottled-water
website, the goal is 50,000 signatures. Please include your personal email address when submitting. Once completed, share the website with your family and friends, to ensure as many bottled water supporters as possible sign the petition
---------------------------------
CONFIDENTIALITY NOTICE: This e-mail may contain privileged or confidential information and is for the sole use of the intended recipient(s). If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information
is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you.
----------------------------------