I would also check Library1 and
verify that you have turned on “application managed encryption” in
the library.
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Adams,
Dwayne
Sent: Thursday, April 01, 2010 11:16 AM
To: VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] KMS encryption
Hello,
Has anyone run into this issue with KMS? I have setup KMS on
my Master Server and can encrypt data to the pools from my Master. I get
the following error and the tape is frozen when I try to run an encrypted job
from my Media Server. The bptm log says the tape is a LTO3 tape but the
tape is definitely a LTO4 tape. I have read the Technote on this but that
is all I have found.
http://seer.entsupport.symantec.com/docs/321244.htm
Thanks
Dwayne Adams
Encryption unavailable for an ENCR pool
4/1/2010 8:41:25 AM - started process bpbrm (1216)
4/1/2010 8:41:36 AM - connecting
4/1/2010 8:41:36 AM - connected; connect time: 00:00:00
4/1/2010 8:41:37 AM - mounting 001343
4/1/2010 8:42:23 AM - Error bptm(pid=3972) FREEZING media id
001343, Encryption unavailable for an ENCR pool
4/1/2010 8:42:24 AM - Warning bptm(pid=3972) media id 001343 load
operation reported an error
4/1/2010 8:42:24 AM - current media 001343 complete, requesting
next resource Any
4/1/2010 8:42:54 AM - end writing
termination requested by administrator(150)
Netbackup 6.5.4
Library 1 Media Server
Dell ML6000 series
2 LTO4 drives and 4 LTO3 drives (Downed for testing encryption with
LTO4 tapes)
manage_drive_attributes: report_attr, fl1 0x00010049, fl2
0x00000004
Library 2 Master\Media
Dell ML6000 series
6 LTO4 drives
manage_drive_attributes: report_attr, fl1 0x00030849, fl2
0x00000000