Re: [Veritas-bu] kms won't let me write to LTO4 tapes/drives
2010-02-16 17:15:35
LTO4 are configured as HCART, this is correct.
Have you enable the library to use encryption? If not, enable it first. You
may have to buy a license from IBM first.
What netbackup is doing is to keep the keys and enable or disable the
encryption option of the drive, but the drives must be encryption enabled.
stefanos
-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of
judy_hinchcliffe AT administaff DOT com
Sent: Wednesday, February 17, 2010 12:09 AM
To: VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] kms won't let me write to LTO4 tapes/drives
Netbackup on 6.5.5 on an AIX master/media
An IBM TS3310 library with LTO4 tape drives, all tapes are LTO4
This is the job detail
2/16/2010 2:50:12 PM - requesting resource AIX_1drive
2/16/2010 2:50:12 PM - requesting resource
dribsp01.NBU_CLIENT.MAXJOBS.myserver
2/16/2010 2:50:12 PM - requesting resource
dribsp01.NBU_POLICY.MAXJOBS.testing
2/16/2010 2:50:13 PM - granted resource
dribsp01.NBU_CLIENT.MAXJOBS.myserver
2/16/2010 2:50:13 PM - granted resource
dribsp01.NBU_POLICY.MAXJOBS.testing
2/16/2010 2:50:13 PM - granted resource D00001
2/16/2010 2:50:13 PM - granted resource IBM.ULT3580-TD4.000
2/16/2010 2:50:13 PM - granted resource AIX_1drive
2/16/2010 2:50:13 PM - estimated 16934025 kbytes needed
2/16/2010 2:50:15 PM - started process bpbrm (590078)
2/16/2010 2:50:20 PM - connecting
2/16/2010 2:50:21 PM - mounting D00001
2/16/2010 2:50:21 PM - connected; connect time: 00:00:01
2/16/2010 2:51:21 PM - Error bptm(pid=401564) FREEZING media id D00001,
Encryption unavailable for an ENCR pool
2/16/2010 2:51:21 PM - Warning bptm(pid=401564) media id D00001 load
operation reported an error
2/16/2010 2:51:21 PM - current media D00001 complete, requesting next
resource Any
2/16/2010 2:51:33 PM - end writing
termination requested by administrator(150)
this is the tech doc I found
http://seer.entsupport.symantec.com/docs/321244.htm
My tapes are setup with Media type HCART
MY drive type is HCART IBM.ULT3580-TD4.xxx
Now according to everything I read LTO4 is setup as HCART
but looking at that tech note - my tapes are reading as LTO1?
below is from the bptm
14:51:22.548 [401564] <2> manage_drive_attributes: report_attr, fl1
0x00000049,fl2 0x0000000c
It seems LTO4's should have a much higher number for fl 1.
So what do I have wrong that kms won't let me encrypt to the tapes?
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|