Try to find ACSLS Installation,
Configuration, and Administration Guide. I don’t have an URL for an
online copy and have copied the following extracts:
Chapter 7: Verifying and
Changing Dynamic and Static Variables
Step 1: Accessing the
ACSLS Features Configuration Menu
……
2. Log in as acsss.
3. At the password prompt,
press [[ENTER]].
4. To run the configuration
script, enter:
acsss_config
The ACSLS feature
configuration screen appears.
…..
Option 3 - Set General
Product Behavior Variables
This option allows you to set
or change the following:
• Prompt: Enable
Library Volume Statistics Gathering: (ON / OFF) [OFF]: ?
Variable: LIB_VOL_STATS
This option specifies if the
Library Volume Statistics (LVSTATS)
information should be
collected from the following operations: enter; eject; mount; dismount; and
audit.
Logging these statistics can
take considerable disk space. Default is OFF.
• Prompt: Number
of acsss_stats log files to retain [9]:
Variable: VOL_STATS_FILE_NUM
A dynamic value, this option
allows you to specify file size and number of rollover files for the volume
statistics log (acsss_stats.log). Valid entry: 0-9.
Default is 9.
9 is the default when ACSLS
is installed or upgraded.
A dynamic value, this option
allows you to specify the number of additional acsss_stats log
files to retain. If enabled and the current acsss_stats log
file size reaches the threshold size, the log is automatically copied to another
file. Once the specified number of files is reached, the data in the oldest
file is overlaid.
If you specify 0, ACSLS
creates only one event log file with no additional event log files. When this
file reaches its threshold size, an “acsss_stats log
full” message is displayed periodically until the acsss_stats log
is renamed or deleted.
Specify a number between 1
and 9 to enable and specify the number of log files to retain. When the acsss_stats log
reaches the threshold size, the data is moved to the file vol_stats0.log. The
next time the threshold size is reached, the vol_stats0.log data
is moved to vol_stats1.log and the older event log data is moved to
vol_stats0.log.
• Prompt: Maximum
library server access_stats log size in Kbytes (1000 bytes) [500].
Variable: VOL_STATS_FILE_SIZE
This option specifies the
threshold size for the accss_stats log in Kbytes (1000 bytes). Default is
500.
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of veritas
netbackup
Sent: 09 February 2010 09:54 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Assistance require (stats_report in ACSLS )
I have found in one of your tech note that you have
suggested a report "stats_report in ACSLS " . Can you help me to
configure the same in my environment , currently i am using ACS 7.1.0 . Also
not sure if it is getting generated , so require exact path where these reports
are getting generated . Can you please assist me for this task .