Re: [Veritas-bu] Drive config problem
2010-01-13 11:36:41
David,
Did you remember to stop and restart the daemons after making the changes? If this is not the master or stand alone server you should stop and restart them on the master and the media server. It should remind you when you run tpconfig (at the start) but it should be:
/usr/openv/volmgr/bin/stopltid /usr/openv/volmgr/bin/ltid
Jeff
On Wed, Jan 13, 2010 at 9:31 AM, David McWilliams <davidkmcw AT gmail DOT com> wrote:
I guess I didn't... the move worked
The Device Monitor still doesn't see the drives, although "media and device management' does.
Sláinte, David "Build a man a fire he'll be warm for a day, set a man on fire and he'll be warm for the rest of his life" - Terry Pratchett
Checkout my photos - http://www.panoramio.com/user/1113507
On Wed, Jan 13, 2010 at 11:26 AM, Justin Piszcz <jpiszcz AT lucidpixels DOT com> wrote:
Did you rewind and offline the tape OR wait 3 min before you tried to unload?
mt -f /dev/device rewoffl
then move it
On Wed, 13 Jan 2010, David McWilliams wrote:
Tpconfig worked flawlessly. Robtest moved a tape from s1 to d1 fine, but is
giving SCSI errors when trying to move back. Devfsadm seemed ok. I'm
starting to suspect a physical tape library problem, which is of course, not
maintained and really old.
Sláinte,
David
"Build a man a fire he'll be warm for a day, set a man on fire and he'll be
warm for the rest of his life" - Terry Pratchett
Checkout my photos - http://www.panoramio.com/user/1113507
On Wed, Jan 13, 2010 at 11:19 AM, Jeff Cleverley <
jeff.cleverley AT avagotech DOT com> wrote:
David,
I never had any luck with the wizard creating drives in a library. I
always used tpconfig and set it up that way. It sounds like everything else
is working. You should be able to add the drives to the library using
tpconfig.
Jeff
On Wed, Jan 13, 2010 at 8:40 AM, David McWilliams <davidkmcw AT gmail DOT com>wrote:
I was asked to assist with a NetBackup 3.4 problem today. Basically
ltid will not stay up. Further investigation shows that the software
no longer had and device config info. When I try running the config
wizard, it does see the drives, but not in a library, only as
standalone. NetBackup sees the library fine and will inventory
successfully.
I realise this is an extremely old config, so any pointers would be
greatly appreciated.
--
Sláinte,
David
"Build a man a fire he'll be warm for a day, set a man on fire and
he'll be warm for the rest of his life" - Terry Pratchett
Checkout my photos - http://www.panoramio.com/user/1113507
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
--
Jeff Cleverley
Unix Systems Administrator
4380 Ziegler Road
Fort Collins, Colorado 80525
970-288-4611
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
-- Jeff Cleverley Unix Systems Administrator 4380 Ziegler Road Fort Collins, Colorado 80525 970-288-4611
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|