Re: [Veritas-bu] Quick Erase Script (Windows)

Jeff

One other thing to take into consideration is the amount of space you have available on your DDR’s. So if you have a large amount of space you probably would not notice the difference but when you are limited on space on your DDR’s, you will notice right away.

OneWest Bank, FSB
Daniel Jimenez
Technical Consultant
16608 Valley View Ave
La Mirada, CA 90638
Phone: 714-520-3421
Cell: 562-480-2966
Fax: 714-520-3470
Daniel.Jimenez AT owb DOT com
Website: http://www.owb.com/
Website: http://www.onewestbank.com/
____________________________________________________________________
This message contains information which may be confidential and privileged.
Unless you are the addressee (or authorized to receive for the addressee),
you may not use, copy or disclose to anyone the message or any information
contained in the message. If you have received the message in error, please
let the sender know and delete the message. Thank you.

From: Jeff Lightner [mailto:jlightner AT water DOT com]
Sent: Tuesday, November 10, 2009 11:00 AM
To: Jimenez, Daniel; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] Quick Erase Script (Windows)

We use Data Domain here and haven’t seen that.

Are you running image cleanup jobs in NBU?

From: Jimenez, Daniel [mailto:Daniel.Jimenez AT owb DOT com]
Sent: Tuesday, November 10, 2009 1:45 PM
To: Jeff Lightner; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] Quick Erase Script (Windows)

Jeff

When you use Data Domain DDR’s if one of the tapes becomes scratch and is not re-used right away, they hold data that is not cleaned up on the DDR until they are used or quick erased so there can be a few GB’s or several hundred GB’s that can be sitting on the DDR that can be cleaned up. Which is why we are looking for a script.

Daniel Jimenez

Data Protection Team

From: Jeff Lightner [mailto:jlightner AT water DOT com]
Sent: Tuesday, November 10, 2009 10:34 AM
To: Jimenez, Daniel; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] Quick Erase Script (Windows)

There’s no need to erase scratch tapes. When they are scratch then they will be overwritten the next time NBU uses them.

From: veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Jimenez, Daniel
Sent: Tuesday, November 10, 2009 1:04 PM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Quick Erase Script (Windows)

Hey guys

Does anyone have a quick erase script for Netbackup 6.5.3.1 (Windows 2003 Enterprise server)? I would like to be able to schedule the script to find all scratch tapes and run a quick erase on these tapes on a weekly basis. In addition, we have Unix utilities on the box so we can use these commands on the server. Any assistance would be appreciated, thanks.

Daniel Jimenez

Data Protection Team

Proud partner. Susan G. Komen for the Cure.

Please consider our environment before printing this e-mail or attachments.

----------------------------------
CONFIDENTIALITY NOTICE: This e-mail may contain privileged or confidential information and is for the sole use of the intended recipient(s). If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you.
----------------------------------

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu