Have a look at this doc:
ftp://exftpp.symantec.com/pub/support/products/NetBackup_Enterprise_Server/267773.pdf
Extract:
The username used
with the tpconfig
command must be defined as root for
each data mover.
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Jeff
Cleverley
Sent: 05 June 2009 19:20
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] NDMP authentication failing for NetApp.
A quick update is that I was able to configure the NetApp
using the tpconfig -add -nh command line. It finished with no errors and
the NDMP host gui window now shows the NetApp. The set_ndmp_attr -verify
works and seems to talk to the filer OK. The tpautoconf still
fails. A test backup policy fails with error 57 and the connection
refused to host message.
I think I'm getting closer. Any additional suggestions would be
appreciated.
Thanks,
Jeff
Jeff Cleverley wrote:
The tpautoconf doesn't work because it won't let me set up
the filer as a host. I've turned on the debug level but I'm not seeing
any entries from the master server. It appears the requests are not
actually getting sent.
The pbx is something I don't know much about. Is it possible this isn't
configured correctly and may be causing the problem?
Thanks,
Jeff
pharrold AT comcast DOT net wrote:
Run
"tpautoconf -verify ndmp_host_name"
and verify that access is granted
Its located in
/usr/openv/volmgr/bin
If it failes,
enable ndmp debugging on the filer (ndmpd debug 50), and re-run
Check the filer's
ndmps log (generally in //filername/$/etc/ndmpd.log) for clues.
----- Original Message -----
From: "Jeff Cleverley" <jeff.cleverley AT avagotech DOT com>
To: veritas-bu AT mailman.eng.auburn DOT edu
Sent: Thursday, June 4, 2009 7:48:06 PM GMT -06:00 US/Canada Central
Subject: [Veritas-bu] NDMP authentication failing for NetApp.
Greetings,
I'm trying to get a remote NDMP backup connection going between my new 6.5.3
RHEL master and one of our NetApp filers (7.2.5.1). We have a non-root
account on the filer (ndmpuser) and have given it a password. This has
been used by Operations Manager in the past with no problems. When I try
to set up credentials for that NDMP host, I use the user name
"ndmpuser" and the encrypted password I got from running "ndmpd
password ndmpuser" on the filer. This fails authentication. The
filer is running NDMP version 4.
The error message is coming back saying the media servers could not be reached
or the credentials are invalid. The tape library is on the master server
so I have not set the filer up as a media server. The filer is a production
system getting backups from 4 different countries so I'm reluctant to start
changing NDMP levels or password length options.
Please tell me what I'm missing.
Thanks,
Jeff
--
Jeff Cleverley
Unix Systems Administrator
4380 Ziegler Road
Fort Collins, Colorado 80525
970-288-4611
jeff.cleverley AT avagotech DOT com
_______________________________________________ Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
--
Jeff Cleverley
Unix Systems Administrator
4380 Ziegler Road
Fort Collins, Colorado 80525
970-288-4611
jeff.cleverley AT avagotech DOT com
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
--
Jeff Cleverley
Unix Systems Administrator
4380 Ziegler Road
Fort Collins, Colorado 80525
970-288-4611
jeff.cleverley AT avagotech DOT com
This email has been scanned for viruses and malware, and automatically archived by Mimecast SA (Pty) Ltd, an innovator in Software as a Service (SaaS) for business. Mimecast Unified Email Management
? (UEM) offers email continuity, security, archiving and compliance with all current legislation. To find out more, contact StorTech.
stormcid
