Hi All

Hit another snag in a new deployment, seem to be requiring knowledge
from the group on a number of occasions over the last couple of months,
its appreciated.

Our DR environment has just acquired an STK SL3000 and we are having
issues with the robotic config in NBU.

If you run the wizard the results are that NBU interprets the library as
remote for some unknown reason.

We have downloaded the device mappings and applied successfully however
don't seem to be able to get it working.

The T10kB drives in the library are fine.

The library and drives are dual pathed and visible down both paths

c5::500104f000ad41c8,0         med-changer  connected    configured
unknown
c5::500104f000ad41d8,0         tape         connected    configured
unknown
c5::500104f000ad41e1,0         tape         connected    configured
unknown
c5::500104f000ad41e4,0         tape         connected    configured
unknown
c5::500104f000ad41ed,0         tape         connected    configured
unknown
c6                             fc           connected    unconfigured
unknown
c7                             fc-fabric    connected    configured
unknown
c7::500104f000ad41c8,0         med-changer  connected    configured
unknown
c7::500104f000ad41d8,0         tape         connected    configured
unknown
c7::500104f000ad41e1,0         tape         connected    configured
unknown
c7::500104f000ad41e4,0         tape         connected    configured
unknown
c7::500104f000ad41ed,0         tape         connected    configured
unknown

additionally scan -chnager finds the library and robot no problem

************************************************************
*********************** SDT_CHANGER ************************
************************************************************
------------------------------------------------------------
Device Name  : "/dev/sg/c0tw500104f000ad41c8l0"
Passthru Name: "/dev/sg/c0tw500104f000ad41c8l0"
Volume Header: ""
Port: -1; Bus: -1; Target: -1; LUN: -1
Inquiry    : "STK     SL3000          2.05"
Vendor ID  : "STK     "
Product ID : "SL3000          "
Product Rev: "2.05"
Serial Number: "571000200222"
WWN          : ""
WWN Id Type  : 0
Device Identifier: ""
Device Type    : SDT_CHANGER
NetBackup Robot Type: 8
Removable      : Yes
Device Supports: SCSI-5
Number of Drives : 4
Number of Slots  : 200
Number of Media Access Ports: 26
Drive 1 Serial Number      : "572004000580"
Drive 2 Serial Number      : "572004000573"
Drive 3 Serial Number      : "572004000561"
Drive 4 Serial Number      : "572004000267"
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name  : "/dev/sg/c1tw500104f000ad41c8l0"
Passthru Name: "/dev/sg/c1tw500104f000ad41c8l0"
Volume Header: ""
Port: -1; Bus: -1; Target: -1; LUN: -1
Inquiry    : "STK     SL3000          2.05"
Vendor ID  : "STK     "
Product ID : "SL3000          "
Product Rev: "2.05"
Serial Number: "571000200222"
WWN          : ""
WWN Id Type  : 0
Device Identifier: ""
Device Type    : SDT_CHANGER
NetBackup Robot Type: 8
Removable      : Yes
Device Supports: SCSI-5
Number of Drives : 4
Number of Slots  : 200
Number of Media Access Ports: 26
Drive 1 Serial Number      : "572004000580"
Drive 2 Serial Number      : "572004000573"
Drive 3 Serial Number      : "572004000561"
Drive 4 Serial Number      : "572004000267"
Flags : 0x0
Reason: 0x0

However, even I I try add the library through tpconfig I just don't seem
to be able to get is working.

Anyone know of any gotach'a with this particular library??

Regards
 
David Clooney
Enterprise Storage Services
 



Notice to recipient:
The information in this internet e-mail and any attachments is confidential and 
may be privileged. It is intended solely for the addressee. If you are not the 
intended addressee please notify the sender immediately by telephone. If you 
are not the intended recipient, any disclosure, copying, distribution or any 
action taken or omitted to be taken in reliance on it, is prohibited and may be 
unlawful.

When addressed to external clients any opinions or advice contained in this 
internet e-mail are subject to the terms and conditions expressed in any 
applicable governing terms of business or client engagement letter issued by 
the pertinent Bank of America group entity.

If this email originates from the U.K. please note that Bank of America, N.A., 
London Branch and Banc of America Securities Limited are authorised and 
regulated by the Financial Services Authority.  For all U.K. corporate 
disclosures, please refer to www.bankofamerica.com/ukcompanies
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu