Re: [Veritas-bu] Solaris 10 run Netbackup cannot detect Sun StorageTekSL48??
2009-02-11 02:24:29
After you disable mpxio, have you rerun sg.build & sg.install , maybe
its necessary.
KinAn wrote:
> I disable mpxio and config success for solaris detect robot
>
> root@backup # ./sgscan all
> /dev/sg/c0t0l0: Disk (/dev/rdsk/c1t0d0): "LSILOGICLogical Volume"
> /dev/sg/c0t2l0: Disk (/dev/rdsk/c1t2d0): "LSILOGICLogical Volume"
> /dev/sg/c0tw204200a0b8335536l0: Disk (/dev/rdsk/c2t204200A0B8335536d0): "SUN
> CSM200_R"
> /dev/sg/c0tw204200a0b8335536l1: Disk (/dev/rdsk/c2t204200A0B8335536d1): "SUN
> CSM200_R"
> /dev/sg/c0tw204300a0b8335536l0: Disk (/dev/rdsk/c4t204300A0B8335536d0): "SUN
> CSM200_R"
> /dev/sg/c0tw204300a0b8335536l1: Disk (/dev/rdsk/c4t204300A0B8335536d1): "SUN
> CSM200_R"
> /dev/sg/c0tw500110a0008d1f7al0: Tape (/dev/rmt/1): "HP Ultrium 4-SCSI"
> /dev/sg/c0tw500110a0008d1f80l0: Tape (/dev/rmt/0): "HP Ultrium 4-SCSI"
> /dev/sg/c0tw500110a0008d1f80l1: Changer: "HP MSL G3 Series"
>
> Next i run netbackup, and add robot, driver to config, have error when
> inventory robot
>
> robot inventory failed: Unable to sense robotic device (202)
> and
> Driver diagnotics fail
>
> Please help me, thank everybody.
>
> +----------------------------------------------------------------------
> |This was sent by kinan_kazuki AT yahoo DOT com via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +----------------------------------------------------------------------
>
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
>
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|