Re: [Veritas-bu] Solaris 10 run Netbackup cannot detect Sun StorageTekSL48??
2009-02-10 23:35:08
You need to rebuild your sg.conf and st.conf files. Download Veritas Media Configuration pdf file and look on page 7 for how to configure SCSI passthru drivers ( it's fully detailed).
Good luck
On Wed, Feb 11, 2009 at 12:38 AM, KinAn <netbackup-forum AT backupcentral DOT com> wrote:
Hi all
I have Sun server T5140 run Solaris 10 Sparc, when i connect it with Tape SL48 via SAN. Server can not detect robotic, and only detect tape driver so that Netbackup cannot detect robotic . Can you guide me how to config driver for robotic.
root@backup # /usr/openv/volmgr/bin/sgscan all
/dev/sg/c0t0l0: Disk (/dev/rdsk/c1t0d0): "LSILOGICLogical Volume"
/dev/sg/c0t2l0: Disk (/dev/rdsk/c1t2d0): "LSILOGICLogical Volume"
/dev/sg/c0tw500110a0008d1f7al0: Tape (/dev/rmt/0): "HP Ultrium 4-SCSI"
/dev/sg/c0tw500110a0008d1f81l0: Tape (/dev/rmt/1): "HP Ultrium 4-SCSI
Thanks
+----------------------------------------------------------------------
|This was sent by kinan_kazuki AT yahoo DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|