[Veritas-bu] Solaris 10 run Netbackup cannot detect Sun StorageTekSL48??
2009-02-10 13:53:20
The robot will show up as lun 1 on the same WWN as one of the tape drives
(selectable in SL48 web interface). You've probably configured the sg driver to
look only at lun 0 (check /kernel/drv/sg.conf). I usually specify "-ml 1" when
running sg.build.
KinAn wrote:
> Hi all
>
> I have Sun server T5140 run Solaris 10 Sparc, when i connect it with Tape
> SL48 via SAN. Server can not detect robotic, and only detect tape driver so
> that Netbackup cannot detect robotic . Can you guide me how to config driver
> for robotic.
>
> root@backup # /usr/openv/volmgr/bin/sgscan all
> /dev/sg/c0t0l0: Disk (/dev/rdsk/c1t0d0): "LSILOGICLogical Volume"
> /dev/sg/c0t2l0: Disk (/dev/rdsk/c1t2d0): "LSILOGICLogical Volume"
> /dev/sg/c0tw500110a0008d1f7al0: Tape (/dev/rmt/0): "HP Ultrium 4-SCSI"
> /dev/sg/c0tw500110a0008d1f81l0: Tape (/dev/rmt/1): "HP Ultrium 4-SCSI
>
> Thanks
+----------------------------------------------------------------------
|This was sent by rmg AT ua DOT edu via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|