Re: [Veritas-bu] Netbackup 6.5 and Quantum Scalar 50
2009-02-03 14:48:45
Mailslots are not treated as a normal slot as far as NetBackup is concerned.
You need to have an empty slot for the tape to go into before NetBackup can
then move it into a drive or import it into the library. As a general rule of
thumb, I will usually allocate one empty slot per mailslot in my libraries.
-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of thgreatoz
Sent: Tuesday, February 03, 2009 1:49 PM
To: VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Netbackup 6.5 and Quantum Scalar 50
bob944 wrote:
>
> I don't know your hardware, but are you selecting "Empty media sccess
> port prior to updating" in the inventory GUI?
>
> If the Scalar 50 is like some other small scalar that I saw in a demo,
> when you put tapes in the slid-out magazine, a little dialog comes up on
> the control panel asking you to choose between X and Y. One of those is
> "system," IIRC. And I think the one you want is the "pushbutton" on the
> right side. Without doing that, tapes stay in the magazine.
When I select that option, I get
"media access port request reported that the robotic library is full:
*** Failed to find an available slot to inject to ***"
whether or not there is any media in either of the passthrough ports.
+----------------------------------------------------------------------
|This was sent by koconnor AT dialogue-marketing DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|