Veritas-bu

Re: [Veritas-bu] media ID not unique in database (34)

2008-09-17 22:21:57
Subject: Re: [Veritas-bu] media ID not unique in database (34)
From: "Randy Samora" <Randy.Samora AT stewart DOT com>
To: "Martin, Jonathan" <JMARTI05 AT intersil DOT com>, <veritas-bu AT mailman.eng.auburn DOT edu>
Date: Wed, 17 Sep 2008 21:10:34 -0500

That happens a lot to me as well and you’re right, I run inventory again and I’m okay.  But this time it’s being stubborn.  I’ve printed out a report and I’ll just pull the tapes that were manually put in there and inventory them through the mail slots.  I know there has to be a way to “resync” but I need scratch tapes now for tonight’s backups but if anyone knows the answer, there’s a trip to Hawaii in it for you, all expenses paid except flight, hotel, meals and drinks.  How’s that for incentive?

 

From: Martin, Jonathan [mailto:JMARTI05 AT intersil DOT com]
Sent: Wednesday, September 17, 2008 21:02: VIRUS ALERT!
To: Randy Samora; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] media ID not unique in database (34)

 

Sometimes I have this issue if I move tapes that are in the library.  For example Barcode 123456 is in slot 1 then I move it to slot 2 while changing media.  The next time I inventory NBU complains that that media is already in the robot in slot1.  In most cases running a 2nd inventory immediately following this clears up the issue.

 

-Jonathan

 


From: veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Randy Samora
Sent: Wednesday, September 17, 2008 6:57 PM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] media ID not unique in database (34)

 

My tape dude didn’t want to inventory new tapes into the library 54 at a time so he opened the door and inserted 200 tapes.  When I try to run an inventory now, I get “media ID not unique in database (34)”.    If I run a comparison, the robot inventory shows the new tapes but the Volume Configuration does not and so I see a “Mismatch – Yes”.  But if I try to update the volume configuration, that’s when I get the Status 34.  I’ve rebooted the library but the library already knows what’s in the library.  How do I get NetBackup updated?  This is a Windows environment running NBU 6.0 MP5.

 

Thanks

Randy

No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.6.21/1676 - Release Date: 9/17/2008 09:33: VIRUS ALERT!

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu