On Wed, 14 May 2008, Jackson, Todd wrote:

> All,
>
> Can anyone tell me if having duplicate Target ID's can cause drive
> issues?
>
> We have around 16 drives in a L700 Storage Tek library.
> We have 7 media servers which two of them are new. One of the new drives
> added
> has the same Target ID as an older drive when you view Media and Device
> management / Devices / Drives.
>
> The issue is that the new drive keeps getting tapes stuck in the drive
> and going down.
> Sun ran tests and the drives are good. Can only be Netbackup
> configuration or something wrong
> with the HBA at this point.
>
> Any ideas ?
>
> thanks
> Jackson
>

Yes.

Show the following:

sudo /usr/openv/volmgr/bin/scan -tape
sudo /usr/openv/volmgr/bin/scan -changer
sudo /usr/openv/volmgr/bin/tpconfig -d # on both media servers w/dup id
sudo /usr/openv/volmgr/bin/tpconfig -tables # same as above
sudo /usr/openv/volmgr/bin/vmglob -listall -b


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu