Steve,
Thank you for your answer.
bpclinfo exists on NetBackup 3.4. I have backup jobs for several
classes, which (to my mind :) should be able to run at the same time).
root@bh-ap2 /netbackup/openv/netbackup/logs/bpsched #
/netbackup/openv/netbackup/bin/admincmd/bpclinfo FxAll -L
Class Type: Standard (0)
Active: yes
Follow NFS Mounts: no
Cross Mount Points: yes
Client Compress: yes
Collect TIR Info: no
Class Priority: 2
Ext Security Info: no
File Restore Raw: no
Client Encrypt: no
Max Jobs/Class: 99
Multiple Streams: 1
Disaster Recovery: 0
Max Frag Size: 0 MB (unlimited)
Residence: b2d - - - - - - - - -
Volume Pool: NetBackup - - - - - - - - -
root@bh-ap2 /netbackup/openv/netbackup/logs/bpsched #
/netbackup/openv/netbackup/bin/admincmd/bpclinfo FTS -L
Class Type: Standard (0)
Active: yes
Follow NFS Mounts: no
Cross Mount Points: yes
Client Compress: yes
Collect TIR Info: no
Class Priority: 10
Ext Security Info: no
File Restore Raw: no
Client Encrypt: no
Max Jobs/Class: 99
Multiple Streams: 1
Disaster Recovery: 0
Max Frag Size: 0 MB (unlimited)
Residence: b2d - - - - - - - - -
Volume Pool: NetBackup - - - - - - - - -
root@bh-ap2 /netbackup/openv/netbackup/logs/bpsched #
/netbackup/openv/netbackup/bin/admincmd/bpclinfo Unix-servers -L
Class Type: Standard (0)
Active: yes
Follow NFS Mounts: no
Cross Mount Points: yes
Client Compress: yes
Collect TIR Info: no
Class Priority: 1
Ext Security Info: no
File Restore Raw: no
Client Encrypt: no
Max Jobs/Class: 99
Multiple Streams: 1
Disaster Recovery: 0
Max Frag Size: 0 MB (unlimited)
Residence: b2d - - - - - - - - -
Volume Pool: NetBackup - - - - - - - - -
root@bh-ap2 /netbackup/openv/netbackup/logs/bpsched #
Thank you,
Aleksandr
On Mon, Apr 14, 2008 at 12:44 PM, Steve Fogarty <steve.fogarty AT gmail DOT
com> wrote:
> Sorry about that...misread the question.
>
> Here is something_that_might_help. 3.4 is along time ago, and I have not
> worked with Class Storage Unit, but you could try this.
>
> http://www.pcs-computing.com/support/nb_bpclinfo.html
>
> bpclinfo has a max jobs per class setting. Not sure if bpclinfo is on 3.4
> or not? It doesn't appear to be in 6.5 (which is what I am running), so
> maybe it is an old command going back to 3.4?
>
> Steve
>
>
>
>
>
>
> On Mon, Apr 14, 2008 at 11:16 AM, Aleksandr Nepomnyashchiy
> <anepomn AT gmail DOT com> wrote:
> > Steve,
> > Thank you for your answer.
> > I do have "Allow multiple data streams" set to "Yes" for every class.
> > As far as I understand - this setting affects NetBackup's ability to
> > slice the backup for a single client into several jobs. I was looking
> > for a way to backup several clients simultaneously.
> >
> > In the past I was able to run backups for 2 clients to the same tape
> > (even with "Allow multiple data streams" set to "No").
> >
> > Aleksandr
> >
> >
> >
> >
> >
> > On Mon, Apr 14, 2008 at 9:50 AM, Steve Fogarty <steve.fogarty AT gmail DOT
> > com>
> wrote:
> > > Do you have Multi Data Streams in your Policies set to "yes"?
> > >
> > > Steve
> > >
> > >
> > >
> > >
> > >
> > > On Mon, Apr 14, 2008 at 10:31 AM, Aleksandr Nepomnyashchiy
> > > <anepomn AT gmail DOT com> wrote:
> > >
> > > >
> > > >
> > > >
> > > > Dear All,
> > > >
> > > > For my Disk Storage Unit - "Maximum concurrent jobs" setting is set to
> 3.
> > > >
> > > > I have 3 classes with "Class Storage Unit" property pointing to the
> > > > Disk Storage Unit. Jobs are being queued, but only one job runs at a
> > > > time.
> > > >
> > > > Running NetBackup 3.4 Solaris 8.
> > > >
> > > > Thank you,
> > > > Aleksandr
> > > > _______________________________________________
> > > > Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> > > > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > > >
> > >
> > >
> >
>
>
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
