> One last question (for now): when you add the robot (ACSLS) and tape
> drives to the new media servers, how do you go about doing it (your
> method)?
I use the GUI wizard, it might be faster using command line but I'm lazy. I've also found that I make mistakes using the command line sometimes.
> Could you show your tpconfig -d on the media server using:
>
> 1. 9840 drives
They're 9940's but irrelevant to the core of the example
> 2. T10K drives
/ > tpconfig -d
Id DriveName Type Residence
Drive Path Status
****************************************************************************
0 STK.T10000A.000 hcart3 ACS(3) ACS=0, LSM=2, PANEL=1, DRIVE=3
/dev/rmt/20cbn UP
1 STK.T10000A.001 hcart3 ACS(3) ACS=0, LSM=1, PANEL=1, DRIVE=15
/dev/rmt/33cbn UP
2 STK.T10000A.002 hcart3 ACS(3) ACS=0, LSM=1, PANEL=1, DRIVE=3
/dev/rmt/36cbn UP
3 STK.T10000A.003 hcart3 ACS(3) ACS=0, LSM=0, PANEL=1, DRIVE=15
/dev/rmt/49cbn UP
4 STK.T10000A.004 hcart3 ACS(3) ACS=0, LSM=3, PANEL=1, DRIVE=15
/dev/rmt/01cbn UP
5 STK.T10000A.005 hcart3 ACS(3) ACS=0, LSM=2, PANEL=1, DRIVE=15
/dev/rmt/17cbn UP
6 STK.T10000A.006 hcart3 ACS(3) ACS=0, LSM=3, PANEL=1, DRIVE=3
/dev/rmt/04cbn UP
7 STK.T10000A.007 hcart3 ACS(3) ACS=0, LSM=0, PANEL=1, DRIVE=3
/dev/rmt/52cbn UP
9 STK.T9940B.004 hcart2 TLD(0) DRIVE=1
/dev/rmt/71cbn UP
10 HP.ULTRIUM3-SCSI.001 hcart TLD(0) DRIVE=4
/dev/rmt/65cbn UP
11 HP.ULTRIUM3-SCSI.000 hcart TLD(0) DRIVE=3
/dev/rmt/66cbn UP
12 STK.T9940B.000 hcart2 ACS(3) ACS=0, LSM=3, PANEL=1, DRIVE=12
/dev/rmt/13cbn UP
13 STK.T9940B.001 hcart2 ACS(3) ACS=0, LSM=2, PANEL=1, DRIVE=12
/dev/rmt/29cbn UP
14 STK.T9940B.002 hcart2 ACS(3) ACS=0, LSM=1, PANEL=1, DRIVE=12
/dev/rmt/45cbn UP
Currently defined robotics are:
TLD(0) robot control host = recyclebin-bkup
ACS(3) ACSLS server = acsdov,
EMM Server = tardis-bkup
/ >
> And also the commands you used to configure them, and also:
> /usr/openv/volmgr/bin/vmglob -listall -b on the master?
/nbdb/images/imaging-bkup/1186000000/catstore > /usr/openv/volmgr/bin/vmglob -listall -b
device
type device name serial number host name
------------------------------------------------------------------------
robot ROBOT3 ACS-0-acsdov buup001
robot ROBOT0 MPC02205020 buup001
drive STK.T9940B.002 479000035672 buup001
drive STK.T9940B.001 479000033369 buup001
drive STK.T9940B.000 479000018610 buup001
drive HP.ULTRIUM3-SCSI.000 HU106449YG buup001
drive HP.ULTRIUM3-SCSI.001 HU10645MC1 buup001
drive STK.T9940B.004 479000012703 buup001
drive STK.T10000A.007 531002002255 buup001
drive STK.T10000A.006 531002003486 buup001
drive STK.T10000A.005 531002002483 buup001
drive STK.T10000A.004 531002002684 buup001
drive STK.T10000A.003 531002003468 buup001
drive STK.T10000A.002 531002003474 buup001
drive STK.T10000A.001 531002003475 buup001
drive STK.T10000A.000 531002003900 buup001
I've shortened the output as I'm guessing you just want to see what it looks like.
Cheers,
Dominik
-----Original Message-----
From: Justin Piszcz [mailto:jpiszcz AT lucidpixels DOT com]
Sent: Tuesday, 26 February 2008 10:59 AM
To: Dominik Pietrzykowski
Cc: veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] SL8500 Question (Different media generations)
On Tue, 26 Feb 2008, Dominik Pietrzykowski wrote:
>
>
>> Quite nice-- have you experienced any issues with that setup so far?
>
> A few, more to do with adding new media servers and seeing limits on the new
> ACSLS client file. There's a limit as to how many you can add to a line.
>
> I have had to restart drives individually and we had a few that were DOA
> when we had the library setup.
>
> One tip is that make sure tapes are not in use when you try to eject them,
> netbackup does not like it. One of the guys did it here and it took me a
> while to fix it.
>
>> Also, how did you add the drives via ACSLS?
>
> run:
>
> config drive 0,3,1 (lsm to search for new drives)
>
> Note: Do this from the command line as acsss user and not in acsls
> (cmd_proc)
>
> I'm guessing you know how to list drives in acsls to see that new ones have
> been added ?
>
>> With the standard config acs > 0 command to pickup & re-inventory all
>> hardware or?
>
> Haven't used that one.
>
> Cheers,
>
> Dominik
One last question (for now): when you add the robot (ACSLS) and tape drives
to the new media servers, how do you go about doing it (your method)?
Could you show your tpconfig -d on the media server using:
1. 9840 drives
2. T10K drives
And also the commands you used to configure them, and also:
/usr/openv/volmgr/bin/vmglob -listall -b on the master?
Thanks!
Justin.
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|