# /usr/openv/netbackup/bin/admincmd/nbemmcmd -changesetting 
-do_not_eject_standalone 1 -machinename masterservername

Confirm that the above command was successful:
# /usr/openv/netbackup/bin/admincmd/nbemmcmd -listsettings -machinename 
masterservername | grep DO_NOT_EJECT_STANDALONE

You should see the following:
DO_NOT_EJECT_STANDALONE="yes"

Muhammad Shafi

> Message: 6
> Date: Thu, 8 Nov 2007 08:44:39 -0600
> From: "Iverson, Jerald" 
> Subject: Re: [Veritas-bu] disable automatic eject after backup
> completed ( standalone tape drive )
> To: "Didier BRUN" ,
> 
> Message-ID:
> 
>
> Content-Type: text/plain; charset="us-ascii"
>
> put this line in /usr/openv/volmgr/vm.conf:
>
> DO_NOT_EJECT_STANDALONE
>
> i believe this worked in netbackup 3.2 thru 5.1. in 6.0 you use the
> nbemmcmd:
>
> master1:.../nb6# nbemmcmd -?
> NBEMMCMD, Version:6.0MP4(20060530)
> An invalid option was used.
> Usage:
> nbemmcmd [-addhost] [-brief] [-changesetting] [-deletehost]
> [-deletemedia] [-deletemerge] [-errorsdb] [-forcemerge]
> [-getemmserver] [-help] [-listhosts] [-listmedia]
> [-listsettings] [-machinealias] [-releasecache]
> [-renamehost] [-servercontrol] [-setemmserver]
> [-updatehost]
> Type "nbemmcmd - -help" for help on an individual option.
> Command did not complete successfully.
>
> master1:.../nb6# nbemmcmd -listsettings -help
> NBEMMCMD, Version:6.0MP4(20060530)
> Help requested.
> Usage:
> nbemmcmd -listsettings [-brief] -machinename 
> Command completed successfully.
>
> master1:.../nb6# nbemmcmd -listsettings -machinename media1
> NBEMMCMD, Version:6.0MP4(20060530)
> The following configuration settings were found:
> ALLOW_MULTIPLE_RETENTIONS_PER_MEDIA="no"
> DISABLE_DISK_STU_JOB_THROTTLING="no"
> DISABLE_STANDALONE_DRIVE_EXTENSIONS="no"
> MEDIA_REQUEST_DELAY="0"
> MUST_USE_LOCAL_DRIVE="no"
> NON_ROBOTIC_MEDIA_ID_PREFIX="A"
> MAX_REALLOC_TRIES="1000"
> DISALLOW_NONNDMP_ON_NDMP_DRIVE="yes"
> DO_NOT_EJECT_STANDALONE="yes"
> DONT_USE_SLAVE="no"
> DRIVE_ERROR_THRESHOLD="2"
> MEDIA_ERROR_THRESHOLD="2"
> TIME_WINDOW="12"
> RETURN_UNASSIGNED_MEDIA_TO_SCRATCH_POOL="yes"
> VAULT_CLEAR_MEDIA_DESC="no"
> Command completed successfully.
> master1:.../nb6#
>
> good luck,
> jerald
>
> -----Original Message-----
> From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Didier
> BRUN
> Sent: Thursday, November 08, 2007 8:03 AM
> To: VERITAS-BU AT mailman.eng.auburn DOT edu
> Subject: [Veritas-bu] disable automatic eject after backup completed (
> standalone tape drive )
>
> Hello,
>
> Someone have a solution for to disable the automatic eject after
> backup
> completed on standalone tape drive ?
>
>
> Many thanks,
>
> Didier

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu