Veritas-bu

Re: [Veritas-bu] disable automatic eject after backup completed ( standalone tape drive )

2007-11-08 09:56:16
Subject: Re: [Veritas-bu] disable automatic eject after backup completed ( standalone tape drive )
From: "Iverson, Jerald" <Jerald.Iverson AT aiminvestments DOT com>
To: "Didier BRUN" <didier.brun AT fr.thalesgroup DOT com>, <VERITAS-BU AT mailman.eng.auburn DOT edu>
Date: Thu, 8 Nov 2007 08:44:39 -0600
put this line in /usr/openv/volmgr/vm.conf:

DO_NOT_EJECT_STANDALONE 

i believe this worked in netbackup 3.2 thru 5.1.  in 6.0 you use the
nbemmcmd:

master1:.../nb6# nbemmcmd -?  
NBEMMCMD, Version:6.0MP4(20060530)
An invalid option was used.
Usage: 
nbemmcmd  [-addhost] [-brief] [-changesetting] [-deletehost] 
[-deletemedia] [-deletemerge] [-errorsdb] [-forcemerge] 
[-getemmserver] [-help] [-listhosts] [-listmedia] 
[-listsettings] [-machinealias] [-releasecache] 
[-renamehost] [-servercontrol] [-setemmserver] 
[-updatehost]
Type "nbemmcmd -<option> -help" for help on an individual option.
Command did not complete successfully.

master1:.../nb6# nbemmcmd -listsettings -help
NBEMMCMD, Version:6.0MP4(20060530)
Help requested.
Usage: 
nbemmcmd -listsettings  [-brief] -machinename <string>
Command completed successfully.

master1:.../nb6# nbemmcmd -listsettings -machinename media1
NBEMMCMD, Version:6.0MP4(20060530)
The following configuration settings were found:
ALLOW_MULTIPLE_RETENTIONS_PER_MEDIA="no"
DISABLE_DISK_STU_JOB_THROTTLING="no"
DISABLE_STANDALONE_DRIVE_EXTENSIONS="no"
MEDIA_REQUEST_DELAY="0"
MUST_USE_LOCAL_DRIVE="no"
NON_ROBOTIC_MEDIA_ID_PREFIX="A"
MAX_REALLOC_TRIES="1000"
DISALLOW_NONNDMP_ON_NDMP_DRIVE="yes"
DO_NOT_EJECT_STANDALONE="yes"
DONT_USE_SLAVE="no"
DRIVE_ERROR_THRESHOLD="2"
MEDIA_ERROR_THRESHOLD="2"
TIME_WINDOW="12"
RETURN_UNASSIGNED_MEDIA_TO_SCRATCH_POOL="yes"
VAULT_CLEAR_MEDIA_DESC="no"
Command completed successfully.
master1:.../nb6# 

good luck,
jerald 

-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Didier
BRUN
Sent: Thursday, November 08, 2007 8:03 AM
To: VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] disable automatic eject after backup completed (
standalone tape drive )

Hello,

        Someone have a solution for to disable the automatic eject after
backup 
completed on standalone tape drive ?


Many thanks,

Didier
        
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
****************************************************************
Confidentiality Note: The information contained in this
message, and any attachments, may contain confidential
and/or privileged material.  It is intended solely for the
person(s) or entity to which it is addressed.  Any review,
retransmission, dissemination, or taking of any action in
reliance upon this information by persons or entities other
than the intended recipient(s) is prohibited.  If you received
this in error, please contact the sender and delete the
material from any computer.
****************************************************************

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

<Prev in Thread] Current Thread [Next in Thread>