Jason,

I am not sure...I won't be back at the client until later this week so I can
check.  If it shows up in the BMR database for the client, shouldn't it be
on the CD?  What kind of issues have you run into with NICs..and what did
you do that I should be aware of? 


 
 
Reneé Carlisle 
ServerWare Corporation
 
www.serverwarecorp.com






-----Original Message-----
From: Brooks, Jason [mailto:brooksje AT longwood DOT edu] 
Sent: Monday, November 05, 2007 9:35 AM
To: rcarlisle; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] BMR Restore - Windows

Should be!

Does the boot CD show you your NICs?  NICs can be a problem sometimes. 

> -----Original Message-----
> From: veritas-bu-bounces AT mailman.eng.auburn DOT edu 
> [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf 
> Of rcarlisle
> Sent: Monday, November 05, 2007 8:22 AM
> To: Brooks, Jason; veritas-bu AT mailman.eng.auburn DOT edu
> Subject: Re: [Veritas-bu] BMR Restore - Windows
> 
> 
> Jason,
> 
> See answers below:
> 
> Reneé Carlisle
> ServerWare Corporation
> 
> 
> -----Original Message-----
> From: Brooks, Jason [mailto:brooksje AT longwood DOT edu]
> Sent: Monday, November 05, 2007 8:15 AM
> To: rcarlisle; veritas-bu AT mailman.eng.auburn DOT edu
> Subject: RE: [Veritas-bu] BMR Restore - Windows
> 
> Couple of questions:
> 
> 1.  Version of NetBackup?  I'm figuring, by what you've told 
> us, 6.5, but want to make sure.
> 
> Then environment is up on 6.5
> 
> 2.  BMR Client.  Is it the same piece of hardware or a 
> different box altogether?
> 
> Very basic test for BMR...we took a new Windows box that was 
> a test system, loaded a NBU 6.5 client onto it.  Backed it up 
> with to load teh BMR database.  Ran prepare to recover, 
> created a boot media and tried to boot from the media.
> 
> 
> 3.  Network config: is the BMR master on the same subnet of 
> client, or, at minimum, can you connect to the master from 
> where your BMR client is located?
> 
> Master and media are on the same subnet and we have full 
> communication between the two.
> 
> 
> 4.  If it's a new box, did you update the MAC address in the 
> copied Current Config in NB?
> 
> 
> Same box as the master server, and I have confirmed that the 
> mac address is in the current configuration on the client in 
> the BMR database.  I thought this one would be about as easy 
> as you could get!
> 
>  
> Thanks
> 
> 
> Jason
> 
> 
> > -----Original Message-----
> > From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
> > [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of 
> > rcarlisle
> > Sent: Monday, November 05, 2007 7:23 AM
> > To: 'rcarlisle'; veritas-bu AT mailman.eng.auburn DOT edu
> > Subject: Re: [Veritas-bu] BMR Restore - Windows
> >
> > one more critical piece of info...we are booting from CD on these 
> > guys..not trying to PXE boot.
> > 
> > 
> > 
> > Reneé Carlisle
> > ServerWare Corporation
> >  cell 585-329-9788
> > 
> >
> > Rochester Office
> > 1250 Pittsford-Victor Rd.
> > Building 100 - Suite 150
> > Pittsford, NY 14534
> > phone: (585) 785-6100
> > fax: (585) 292-1644
> > rcarlisle AT serverwarecorp DOT com <mailto:rcarlisle AT serverwarecorp DOT 
> > com>
> > www.serverwarecorp.com <http://www.serverwarecorp.com/>
> >
> > [image] <http://www.serverwarecorp.com/>             
> > Albany Office
> > 125 Wolf Road
> > Suite 309
> > Albany, NY 12205
> > phone: (518) 453-1296
> > fax: (518) 453-1282 rcarlisle AT serverwarecorp DOT com 
> > <mailto:rcarlisle AT serverwarecorp DOT com>
> > <mailto:r AT serverwarecorp DOT com< /a 
> <mailto:r AT serverwarecorp DOT com< /a> >> 
> > www.serverwarecorp.com <http://www.serverwarecorp.com/>
> >
> >
> >
> >
> >
> > 
> >
> > ________________________________
> >
> > From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
> > [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of 
> > rcarlisle
> > Sent: Sunday, November 04, 2007 8:41 PM
> > To: veritas-bu AT mailman.eng.auburn DOT edu
> > Subject: [Veritas-bu] BMR Restore - Windows
> >
> >
> > I am new to BMR and having trouble getting a windows client to 
> > restore.  It gives giving me an error about not finding a network 
> > configuration.  When I look under the "current"
> > configuration for the windows clients...I notice that it finds the 
> > network interfaces, but there is nothing listed under network 
> > routes...is that an issue?
> > 
> > Thanks
> > 
> > Renee Carlisle
> > ServerWare Corporation
> >
> 
> 
> 



_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu