Chris,
we did experience one issue with timeouts for large volumes with massive 
numbers of small files (ie: 500GB file system at 90% full, average file size 
11k), which was resolved back at MP4 for 5.1.  Otherwise our speeds have always 
been significantly better than standard file backups without any special 
tweaking.  We also found that using DSSU's in combination with Flashbackup gave 
the best performance- not really a surprise there.  

Of course, if you have mostly empty volumes you pay a huge price in terms of 
size and overall time, but I'm sure you knew that.  In general we have found 
that we get excellent results using the same settings that work best in the 
rest of the environment.

Tom



Hall, Christian N. wrote:
> Tom, 
> 
> I had the syntax resolved thanks to all that have responded. However, I
> noticed that my flash-backups speeds are less then traditional backups.
> Are you aware of tuning suggestions other then buffer_size and # of
> buffers available that you have used? Have you experimented with
> fragment sizes? 
> 
> Thanks,
> Chris Hall
> 
> 
> -----Original Message-----
> From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of 
> tburrell
> Sent: Friday, October 12, 2007 2:41 PM
> To: VERITAS-BU AT mailman.eng.auburn DOT edu
> Subject: [Veritas-bu] Flash backup for mount-points Windows 2003
> 
> 
> Chris,
> To be a little more definitive- 5.1 does support Windows Flashbackup-
> it's kind of hidden on the top of page 105 of the "Advanced Client 5.1
> System Administrator's Guide"- they slipped it in as an example in step
> 10.
> 
> We used it extensively (have now upgraded to 6) but it worked very well.
> 
> Tom Burrell
> 
> 
> Hall, Christian N. wrote:
> 
> > All,  
> > 
> > Veritas Netbackup 5.1MP6  
> > Master server Solaris 8 
> > T9940B tape drives X 26  
> > ACSLS 7.1 
> > SSO  
> > Windows 2003 media servers X 20  
> > Emc Symetric storage  
> > EMC Clarrion Storage 
> > EMC 9820-E HBA 
> > Cisco 9513 SAN 
> > Quantum DX-100 VTL 
> > DECRU 1020 
> > 
> > According to VERITAS published documentation I am reading.
> > 
> Fash-backups does not support mount-points on version 5.0. Does this
> also apply for 5.1? I have not found documentation for 5.1 that says the
> contrary. Is there anyone out there that's using flash-backup with
> mount-points with 5.1?  Any help would be appreciated.  
> 
> > 
> > Thanks, 
> > Chris Hall
> > 
> 
> 
> +----------------------------------------------------------------------
> |This was sent by tburrell_mn AT yahoo DOT com via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +----------------------------------------------------------------------
> 
> 
> 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


+----------------------------------------------------------------------
|This was sent by tburrell_mn AT yahoo DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu