Veritas-bu

Re: [Veritas-bu] L1400 anf lto drives zoning question

2007-08-01 13:32:08
Subject: Re: [Veritas-bu] L1400 anf lto drives zoning question
From: "Martin, Jonathan" <JMARTI05 AT intersil DOT com>
To: "Patricia Harmon" <pharmon AT tecoenergy DOT com>, <veritas-bu AT mailman.eng.auburn DOT edu>
Date: Wed, 1 Aug 2007 13:16:40 -0400
Only the "robot control host" needs to see the robot.  That's usually the master or first media server.  If I'm not mistaken my config here is as follows:
 
Zone 1
Master --> Robot Control
 
Zone 2
Master --> Drives
 
Zone 3
Media 1 --> Drives
 
Etc...
 
This assumes you are using all drives on all hosts and using SSO or similar.  If not then you'd divide the drives up by media server (2 per or what have you.)

-Jonathan


From: veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Patricia Harmon
Sent: Wednesday, August 01, 2007 12:33 PM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] L1400 anf lto drives zoning question

The vendor Sun/Storagtek is saying now that the library mut be in one zone and the 8 drives should be in a separate zone.  Does anyone know if this is correct?
 
If they are separate zones do all 4 window servers need to see both zones? 
 
Thanks for any help.
Pat
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu