Bad termination on the BUS? Bad fiber/scsi card?

On Wed, 27 Jun 2007, Jimenez, Daniel wrote:

> Hey guys
>
>
>
> I am having a problem backing up a drive that is mounted to one of our
> media servers. It is a flash backup setup on a Netbackup 6.0 (Windows
> 2003 Server Ent.). Not sure if I have forgotten some setting somewhere,
> any information would be appreciated.  Here is some information from the
> Activity Monitor and the Application Event Logs.
>
>
>
> Detailed Status from Activity Monitor:
>
> 6/27/2007 3:55:04 PM - started process bpbrm (2720)
>
> 6/27/2007 3:55:04 PM - connecting
>
> 6/27/2007 3:55:05 PM - connected; connect time: 00:00:01
>
> 6/27/2007 3:55:09 PM - mounting T00959
>
> 6/27/2007 4:01:52 PM - Error bptm(pid=1732) ioctl (MTREW) failed on
> media id T00959, drive index 0, The I/O bus was reset. (1111)
> (bptm.c.7675)
>
> 6/27/2007 4:01:52 PM - mounted; mount time: 00:06:43
>
> 6/27/2007 4:01:54 PM - Error bptm(pid=1732) ioctl (MTREW) failed on
> media id T00959, drive index 0, The I/O bus was reset. (1111)
> (bptm.c.8954)
>
> 6/27/2007 4:01:56 PM - Error bpbrm(pid=2720) from client prxinfbkp105:
> ERR - bpbkar exiting because backup is aborting
>
> 6/27/2007 4:02:00 PM - Error bpbrm(pid=2720) could not send server
> status message
>
> 6/27/2007 4:01:54 PM - positioning T00959 to file 1
>
> 6/27/2007 4:02:06 PM - end writing
>
> media position error(86)
>
>
>
> -------------------
>
>
>
> Application Event Log Info:
>
>
>
> Source: NetBackup Tape Manag
>
> Type: Error
>
> Category: None
>
> User: N/A
>
> Event ID: 5122
>
>
>
> Description:
>
> DeviceloControl{} error on bus 0, target 0, lun 0: The request could not
> be performed because of an I/O device error.
>
>
>
>
>
>
>
> Daniel Jimenez
>
>
>
>
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu