Veritas-bu

[Veritas-bu] force restore option

2007-03-27 14:59:23
Subject: [Veritas-bu] force restore option
From: jpiszcz.backup at gmail.com (Justin Piszcz)
Date: Tue, 27 Mar 2007 13:59:23 -0500
I spoke with NBU guys on this, it only works if the entire environment
is 100% idle (under 5.1).

On 3/27/07, Trotman, Kevin [CCC-OT_IT] <kevin.trotman at citigroup.com> wrote:
>
>
> Also, since you're effectively changing the storage unit allocation, you
> *might* have to do a:
>
> bpschedreq -read_stu_config
> bpschedreq -read_stunits
>
> Unfortunately, all three of these re-read operations do not work a large
> percentage of the time in versions below 6.0.
>
> Kevin
>
> -----Original Message-----
> From: veritas-bu-bounces at mailman.eng.auburn.edu
> [mailto:veritas-bu-bounces at mailman.eng.auburn.edu]On Behalf
> Of Hindle, Greg
> Sent: Tuesday, March 27, 2007 12:28 PM
> To: Jeff Lightner; NB List Mail
> Subject: Re: [Veritas-bu] force restore option
>
>
> I was planning on adding this option and then run the restore and once the
> restore was running commenting out that line and force the master to reread
> its bp.conf file.
>
> Greg
>
>  ________________________________
>  From: Jeff Lightner [mailto:jlightner at water.com]
> Sent: Tuesday, March 27, 2007 1:22 PM
> To: Hindle, Greg; NB List Mail
> Subject: RE: [Veritas-bu] force restore option
>
>
>
>
>
> For restoring that is all you need.
>
>
>
> For backing up you'd need to point your policy to the storage unit
> associated with the other media server.
>
>
>
> Also some operations will be slow due to timeouts trying to connect to the
> media server that is down even though you're not really directing traffic
> there.
>
>
>
> We do the FORCE_MEDIA_RESTORE option all the time to restore our PROD BCV
> backups to alternate servers for database refreshes.  It works fine.
>
>
>
>  ________________________________
>
>
> From: veritas-bu-bounces at mailman.eng.auburn.edu
> [mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On
> Behalf Of Hindle, Greg
> Sent: Tuesday, March 27, 2007 12:54 PM
> To: NB List Mail
> Subject: [Veritas-bu] force restore option
>
>
>
>
> nb 5.0 mp7 Solaris 9
>
>
>
>
>
> I have a media server that is down at the moment for maint and I have to run
> a restore. Both media servers connected to the same master. All I need to do
> is add the force restore statement to the master bp.conf file and then have
> the master rereads its bp.conf right?
>
>
>
>
>
> add FORCE_RESTORE_MEDIA_SERVER option in master bp.conf.
>
> FORCE_RESTORE_MEDIA_SERVER = <original media/master> <target media/master>.
> You then have to run bpadm g (global) m (modify) d (notify request daemon)
> to reread the bp.conf - this is done on the master server.
>
>
>
>
>
>
>
> Greg
>
>
>  >>> This e-mail and any attachments are confidential, may contain legal,
> professional or other privileged information, and are intended solely for
> the
> addressee.  If you are not the intended recipient, do not use the
> information
> in this e-mail in any way, delete this e-mail and notify the sender. CEG-IP2
>
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
>

<Prev in Thread] Current Thread [Next in Thread>