[Veritas-bu] Replacing tape drives
2007-02-14 15:33:34
Subject: |
[Veritas-bu] Replacing tape drives |
From: |
dbrown at worknetinc.com (Dave Brown) |
Date: |
Wed, 14 Feb 2007 14:33:34 -0600 |
If you change the density on the LT02 drive to HCART, it will be able
to read and write LTO media
-----Original Message-----
From: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf Of Don
Klebba
Sent: Wednesday, February 14, 2007 11:41 AM
To: veritas-bu at mailman.eng.auburn.edu
Subject: [Veritas-bu] Replacing tape drives
We're in the process of replacing our LTO tape drives (HCART) with LTO2
drives (HCART2). We have 2 LTO drives left that we're using in case a
restore is needed. I was wondering if anyone knew of a way to use the
LTO2 drives to read the LTO tapes.
--
Don Klebba
Quicken Loans
Storage Management Team
DonKlebba at quickenloans.com <mailto:DonKlebba at quickenloans.com>
phone: (734)805-7791
cell: (734)634-7486
_______________________________________________
Veritas-bu maillist - Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
This message (including any attachments) is intended for the sole use of the
individual to whom it is addressed and may contain confidential information.
You are hereby notified that any dissemination, distribution, or duplication of
this message by someone other than the intended addressee or their designated
agent is strictly prohibited. Information included in this message that does
not relate to the specified business of Worknet shall be understood as neither
given by nor endorsed by Worknet or its employees. Any cost estimates or
estimated quotes included in this message are considered non-binding estimates
only and must not be considered final costs unless contained within an official
proposal document.
|
|
|