Veritas-bu

[Veritas-bu] Master server with more than one network interface

2007-01-16 10:34:18
Subject: [Veritas-bu] Master server with more than one network interface
From: yusuf.gedikoglu at gantek.com (Yusuf Gedikoglu)
Date: Tue, 16 Jan 2007 17:34:18 +0200
Hi 

I need your helps.

I tired to install NB 6.0 MP4 on solaris 10 master server. Master server have 5 
network interface and we want to backup a subnet from a network interface. I 
have 5 different subnets.

I set different ip  for each interface and then connect it to the each subnet 
switch. 

such as

ce 0 11.200  network access ip and i installed master server with this ip

ce 1 is 40.42 and connect to the 40.xxx subnet

ce 2 is 41.62 and connect to the 41.xxx subnet

I set master serverp bp.conf file

SERVER=netbackup

SERVER=netbackup_40

SERVER=netbackup_41

 

and on the client bp.conf file have the same entries also. clients /etc/hosts 
file is

 ...40.42   netbackup_40  netbackup

bpclntcmd command resolve and there is no communication problem

But when i run a backup job it gives status 23 and 24 error codes. And in the 
client bpcd log file i see that it tried to connect 11.200 which i used for 
netbackup installation.

16:42:16.082 [15605] <16> bpcd main: Couldn't get peer hostname
16:42:16.232 [15607] <2> bpcd main: offset to GMT -7200
16:42:16.232 [15607] <2> logconnections: BPCD ACCEPT FROM 172.26.11.200.35470 
TO 172.26.1
0.197.13724
16:42:16.233 [15607] <2> bpcd main: setup_sockopts complete
16:42:16.246 [15607] <8> bpcd peer_hostname: gethostbyaddr failed : 
HOST_NOT_FOUND (1)
16:42:16.246 [15607] <16> bpcd peer_hostname: gethostbyaddr failed to return 
peer host, h
errno = 1

Is there a solution for this kind configuration.

Best regards

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20070116/adec42bd/attachment.html