I think this might help you out?  

http://www.microsoft.com/windowsserversystem/wss2003/techinfo/plandeploy
/storportwp.mspx


Cheers,
Jon

 

-----Original Message-----
From: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf Of mkiles
Sent: Monday, December 11, 2006 12:20 PM
To: veritas-bu at mailman.eng.auburn.edu
Subject: [Veritas-bu] MSL 6062 tape library and HP LTO3 Tape Drives

Just polling to see what is more prevalent in the
field:

Have a MSL 6062 with two N1200-320 cards, 4 LTO3 tape drives from HP.
Have installed two A7388A HBA's (Basically Emulex LP1050).

Do you use Storport driver for these HBAs or SCSI Miniport? And any
specific settings? 

I have both HBAs direct connected to one N1200-320 card, but I see only
one changer and 2 tape drives, cabling is done as per diagram in the
N1200-320 config guide. Any thoughts?

Thx


 
________________________________________________________________________
____________
Need a quick answer? Get one in minutes from people who know.
Ask your question on www.Answers.yahoo.com
_______________________________________________
Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
 
     This message may contain privileged and/or confidential information.  If 
you have received this e-mail in error or are not the intended recipient, you 
may not use, copy, disseminate or distribute it; do not open any attachments, 
delete it immediately from your system and notify the sender promptly by e-mail 
that you have done so.  Thank you.