[Veritas-bu] New Media Server
2006-12-07 08:21:50
Subject: |
[Veritas-bu] New Media Server |
From: |
Patrick.Whelan at colt.net (Whelan, Patrick) |
Date: |
Thu, 7 Dec 2006 13:21:50 -0000 |
I have never actually tried this, but you might try putting a SCRATCH_POOL =
entry in /usr/openv/volmgr/vm.conf on the new media server.
Regards,
Patrick Whelan
NetBackup Specialist
Architect & Engineering
+44 20 7863 5243
Of all the things I've lost, I miss my mind the most! - Unknown
There are only 10 kinds of people on earth - those who understand binary
and those who don't.
... Als sie mich holten,
gab es keinen mehr, der protestieren konnte
-- Martin Niem?ller
-----Original Message-----
From: veritas-bu-bounces at mailman.eng.auburn.edu [mailto:veritas-bu-bounces
at mailman.eng.auburn.edu] On Behalf Of Deiter Scott
Sent: 07 December 2006 13:12
To: Veritas-bu at mailman.eng.auburn.edu
Subject: [Veritas-bu] New Media Server
We have installed a new media server with a two drive robot at a remote
site to replace two stand alone drives and the old media server.
We want to setup 4 volume pools including a scratch pool at the remote
site.
It appears that these pools must be defined at the new media server as I
have not been able to create another scratch pool in our existing
master/media.
Current version is 5.1 mp4
The master/media is solaris
The new media server is solaris
The remote site has window clients.
I'm wondering what else to look for when creating this new setup.
Scott Deiter
System Administrator
Hanover Direct, Inc.
Hanover, PA
Voice: 717-633-3298
Fax: 717-633-3101
_______________________________________________
Veritas-bu maillist - Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
*************************************************************************************
The message is intended for the named addressee only and may not be disclosed
to or used by anyone else, nor may it be copied in any way.
The contents of this message and its attachments are confidential and may also
be subject to legal privilege. If you are not the named addressee and/or have
received this message in error, please advise us by e-mailing security at
colt.net and delete the message and any attachments without retaining any
copies.
Internet communications are not secure and COLT does not accept responsibility
for this message, its contents nor responsibility for any viruses.
No contracts can be created or varied on behalf of COLT Telecommunications, its
subsidiaries or affiliates ("COLT") and any other party by email Communications
unless expressly agreed in writing with such other party.
Please note that incoming emails will be automatically scanned to eliminate
potential viruses and unsolicited promotional emails. For more information
refer to www.colt.net or contact us on +44(0)20 7390 3900.
|
|
|