Hi
   
  When replace tape drive follow this procedure to configure new drive.
   
  1. Find old tape drive serial number 
  # vmglob -listall -b | grep "drivename"       (drivename =STK9940B_01115_1)
   
  2. Delete drive from vmd.
  # vmglob -delete -drive -serial  479000018436
   
  3. Now configure new tape drive 
  option-1  run followiing command
  # tpautoconf  -a   
   
  option -2  Add manualy
   
  # tpconfig  -add -drive -multihost yes -asciiname <asciidrvname> -altname 
<drive_path>  -type hcart2 -robot <rob_num>  -robtype acs -ACS <acsnum>  -LSM 
<lsmnum>   -PANEL <panelnum>  -robdrnum <drivenum>
   
   
  Thanks
  Amanda Meegama
   
  

"Geyer, Gregory" <Gregory.Geyer at avnet.com> wrote:
  If its 5.x I think you want vmglob:

Usage: 
vmglob -listall [-b | -java] [-h volume_database_host]

vmglob -add -drive|-optical -drvtype 
-serial -name 
[-devhost ] [-vdbhost ] [-flags ]
[-robnum robot_number -robdrvnum robot_drive_number -robtype
robot_type]
[-ACS -LSM -PANEL 
-DRIVE
]
[-wwid -wwid_type ] [-inquiry
]
[-vdrvname ] [-h volume_database_host]

vmglob -add -robot -serial -robnum 
[-devhost ] [-vdbhost vdb_host] [-flags ]
[-wwid -wwid_type ] [-inquiry
]
[-libname 
] [-cntlhost ]
[-h volume_database_host]

vmglob -change -drive|-optical -drvtype 
-serial -name [-old_name
]
[-devhost ] [-vdbhost ] [-flags ]
[-robnum robot_number -robdrvnum robot_drive_number -robtype
robot_type]
[-ACS -LSM -PANEL 
-DRIVE
]
[-wwid -wwid_type ] [-inquiry
]
[-vdrvname ] [-h volume_database_host]

vmglob -change -robot -serial 
-robnum [-old_robnum ]
[-devhost ] [-vdbhost vdb_host] [-flags ]
[-wwid -wwid_type ] [-inquiry
]
[-libname 
      ] [-cntlhost ]
[-h volume_database_host]

vmglob -delete -drive|-optical -drvtype 
-serial -name 
[-devhost ] [-vdbhost ] [-flags ]
[-robnum rob_number -robdrvnum robot_drive_number -robtype
robot_type]
[-wwid -wwid_type ] [-h
volume_database_host]

vmglob -delete -robot -serial -robnum 
[-devhost ] [-vdbhost vdb_host] [-flags ]
[-wwid -wwid_type ] [-h
volume_database_host]

vmglob -get_gdbhost [-h volume_database_host]
vmglob -set_gdbhost [-h volume_database_host] 

-----Original Message-----
From: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf Of
Chris.Romano at lazard.com
Sent: Tuesday, August 08, 2006 1:28 PM
To: veritas-bu at mailman.eng.auburn.edu
Subject: [Veritas-bu] tape drive serial number changed when drive failed
- what do I do?

Hi...

Does anyone know the procedure to follow when a tape drive is
replaced...how do
I tell Netbackup about the new serial number?



Thanks,
Chris Romano


_______________________________________________
Veritas-bu maillist - Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

_______________________________________________
Veritas-bu maillist - Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu


                        
---------------------------------
Do you Yahoo!?
 Everyone is raving about the  all-new Yahoo! Mail Beta.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20060808/155feaec/attachment-0001.html