Simon,
I still think Martin has the right solution for you. Veritas provisions
well for this situation, but try extracting this knowledge from Veritas
documentation!
When you submit the restore and it fails out, please note the full name
of the Media Server it's trying to use (it must be put in exactly as
Veritas expects, either fully qualified or simple hostname, depending).
Whatever hostname Veritas populates the media server field on failed
attempts, is the one you're going to want to use.
However in my experience you may need to set two settings in the Master
Server host properties (make sure you access this via the MASTER SERVER
sub heading or you will not see all options):
Restore Failover: Media Server hostname under Media Server, and Master
server hostname under Failover. The master server name should also
match whatever hostname you refer to it as in the restore setup (again,
fully qualified or not)
General Server: Check Use media host override. Server that preformed
original backups should match the exact media server hostname used by
the backup, and Server that performed the restore should be set to the
matching master server hostname.
Hope this helps.
Cheers,
-karl
-----Original Message-----
From: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf Of
veritas-bu-request at mailman.eng.auburn.edu
Sent: Thursday, June 08, 2006 10:14 AM
To: veritas-bu at mailman.eng.auburn.edu
Subject: Veritas-bu Digest, Vol 2, Issue 32
Send Veritas-bu mailing list submissions to
veritas-bu at mailman.eng.auburn.edu
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
or, via email, send a message with subject or body 'help' to
veritas-bu-request at mailman.eng.auburn.edu
You can reach the person managing the list at
veritas-bu-owner at mailman.eng.auburn.edu
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Veritas-bu digest..."
Today's Topics:
1. Re: HELP - Does things get any worse than this :-((
(((((((((((( (WEAVER, Simon)
2. Re: HELP - Does things get any worse than this
:-(((((((((((((( (ida3248b at post.cybercity.dk)
3. Re: HELP - Does things get any worse than this :-((
(((((((((((( (WEAVER, Simon)
4. Re: MS Windows Java console and firewall - what ports -
resolution (Jim McD)
5. How to only stop new disk to tape jobs from starting
(Hillman, Eric)
----------------------------------------------------------------------
Message: 1
Date: Thu, 8 Jun 2006 07:54:47 +0100
From: "WEAVER, Simon" <simon.weaver at astrium.eads.net>
Subject: Re: [Veritas-bu] HELP - Does things get any worse than this
:-(( ((((((((((((
To: "'Falk, Martin SZ/HZA-ITDS2'" <falkmrt at schaeffler.com>,
veritas-bu at mailman.eng.auburn.edu
Message-ID:
<06F68E0112FAD611839400508BAF1B33083DB70D at mms12032.pth.uk.astrium.corp>
Content-Type: text/plain; charset="us-ascii"
Martin
Did not work - same error message :-(
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B32AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU
Email: <mailto:Simon.Weaver at Astrium-eads.net>
Simon.Weaver at Astrium-eads.net
-----Original Message-----
From: Falk, Martin SZ/HZA-ITDS2 [mailto:falkmrt at schaeffler.com]
Sent: 08 June 2006 07:43
To: WEAVER, Simon; veritas-bu at mailman.eng.auburn.edu
Subject: AW: [Veritas-bu] HELP - Does things get any worse than this
:-((((((((((((((
Hello Simon,
go to Master Server properties -> Restore Failover and enter the old
Media
Server name and the name of the media server that should do the
rerstore.
Regards
Martin
_____
Von: veritas-bu-bounces at mailman.eng.auburn.edu
[mailto:veritas-bu-bounces at mailman.eng.auburn.edu] Im Auftrag von
WEAVER,
Simon
Gesendet: Donnerstag, 8. Juni 2006 07:59
An: veritas-bu at mailman.eng.auburn.edu
Betreff: [Veritas-bu] HELP - Does things get any worse than this
:-((((((((((((((
Guys
I just CANNOT believe how unlucky this site is!!!
I attempted a restore from one of my Servers IP Addresses, that was
being
BACKED UP by the OLD Media Server that was destroyed.
Backup, Archive, Restore tool can SEE the Data, and I have specified the
source and destination client as being different (Destination now being
SERVER001) however when performing the restore it shows the following in
activity monitor....
Activity Monitor shows....
08/06/2006 06:43:48 - begin Restore
08/06/2006 06:43:51 - 1 images required
08/06/2006 06:43:51 - media 0234L3 required
08/06/2006 06:43:51 - media 0236L3 required
08/06/2006 06:44:26 - restored image 194.35.68.208_1148074371 - (cannot
connect to server backup restore manager(205))
08/06/2006 06:44:26 - end Restore; elapsed time: 00:00:38
the restore failed to recover the requested files(5)
I came in early to do this, as I feared something like this may happen
when
I was in bed last night!!
Im starting to lose faith in not only Veritas, but also the people
surrounding me!
Any help or quick answers would be appreciated.
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B32AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU
Email: <mailto:Simon.Weaver at Astrium-eads.net>
Simon.Weaver at Astrium-eads.net
This email is for the intended addressee only.
If you have received it in error then you must not use, retain,
disseminate
or otherwise deal with it.
Please notify the sender by return email.
The views of the author may not necessarily constitute the views of EADS
Astrium Limited.
Nothing in this email shall bind EADS Astrium Limited in any contract or
obligation.
EADS Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS,
England
This email is for the intended addressee only.
If you have received it in error then you must not use, retain,
disseminate or otherwise deal with it.
Please notify the sender by return email.
The views of the author may not necessarily constitute the views of EADS
Astrium Limited.
Nothing in this email shall bind EADS Astrium Limited in any contract or
obligation.
EADS Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS,
England
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20060608/
9ce35bca/attachment-0001.html
------------------------------
Message: 2
Date: Thu, 8 Jun 2006 11:54:59 +0200
From: ida3248b at post.cybercity.dk
Subject: Re: [Veritas-bu] HELP - Does things get any worse than this
:-((((((((((((((
To: "WEAVER, Simon" <simon.weaver at astrium.eads.net>,
veritas-bu at mailman.eng.auburn.edu
Message-ID: <20060608094853.M11847 at post.cybercity.dk>
Content-Type: text/plain; charset=iso-8859-1
Hi Simon
You could try
bpimage -newserver <newserver name> -id <tape_id>
bpmedia -movedb -m <tape_id> -newserver <newserver name>
Regards
Michael
On Thu, 8 Jun 2006 06:58:38 +0100 , WEAVER, Simon wrote
> Guys
> I just CANNOT believe how unlucky this site is!!!
> ?
> I attempted a restore from one of my Servers IP Addresses, that was
being
BACKED UP by the OLD Media Server that was destroyed.
> ?
> Backup, Archive, Restore tool can SEE the Data, and I have specified
the
source and destination client as being different (Destination now being
SERVER001) however when performing the restore it shows the following in
activity monitor....
> ?
> Activity Monitor shows....
> 08/06/2006 06:43:48 - begin Restore
> 08/06/2006 06:43:51 - 1 images required
> 08/06/2006 06:43:51 - media 0234L3 required
> 08/06/2006 06:43:51 - media 0236L3 required
> 08/06/2006 06:44:26 - restored image 194.35.68.208_1148074371 -
(cannot
connect to server backup restore manager(205))
> 08/06/2006 06:44:26 - end Restore; elapsed time: 00:00:38
> the restore failed to recover the requested files(5)
> ?
> I came in early to do this, as I feared something like this may happen
when
I was in bed last night!!
> ?
> Im starting to lose faith in not only Veritas, but also the people
surrounding me!
> ?
> Any help or quick answers would be appreciated.
> Regards
> Simon Weaver
> 3rd Line Technical Support
> Windows Domain Administrator
> EADS Astrium Limited, B32AA IM (DCS)
> Anchorage Road, Portsmouth, PO3 5PU
> Email: Simon.Weaver at Astrium-eads.net
> ?
This email is for the intended addressee only.
> If you have received it in error then you must not use, retain,
disseminate
or otherwise deal with it.
> Please notify the sender by return email.
> The views of the author may not necessarily constitute the views of
EADS
Astrium Limited.
> Nothing in this email shall bind EADS Astrium Limited in any contract
or
obligation.
>
> EADS Astrium Limited, Registered in England and Wales No. 2449259
> Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1
2AS,
England
>
--
Cybercity Webhosting (http://www.cybercity.dk)
------------------------------
Message: 3
Date: Thu, 8 Jun 2006 11:14:01 +0100
From: "WEAVER, Simon" <simon.weaver at astrium.eads.net>
Subject: Re: [Veritas-bu] HELP - Does things get any worse than this
:-(( ((((((((((((
To: "'ida3248b at post.cybercity.dk'" <ida3248b at post.cybercity.dk>,
veritas-bu at mailman.eng.auburn.edu
Message-ID:
<06F68E0112FAD611839400508BAF1B33083DB717 at mms12032.pth.uk.astrium.corp>
Content-Type: text/plain; charset="iso-8859-1"
Ive tried that, and that failed, HOWEVER thanks to Martin and a change
in
the DB ownership of the tapes I may have just cracked it, but running a
consistency check on the DB at the moment!
So will let you know later!
Thanks everyone
Regards
Simon Weaver
3rd Line Technical Support
Windows Domain Administrator
EADS Astrium Limited, B32AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU
Email: Simon.Weaver at Astrium-eads.net
-----Original Message-----
From: ida3248b at post.cybercity.dk [mailto:ida3248b at post.cybercity.dk]
Sent: 08 June 2006 10:55
To: WEAVER, Simon; veritas-bu at mailman.eng.auburn.edu
Subject: Re: [Veritas-bu] HELP - Does things get any worse than this
:-((((((((((((((
Hi Simon
You could try
bpimage -newserver <newserver name> -id <tape_id>
bpmedia -movedb -m <tape_id> -newserver <newserver name>
Regards
Michael
On Thu, 8 Jun 2006 06:58:38 +0100 , WEAVER, Simon wrote
> Guys
> I just CANNOT believe how unlucky this site is!!!
> ?
> I attempted a restore from one of my Servers IP Addresses, that was
> being
BACKED UP by the OLD Media Server that was destroyed.
> ?
> Backup, Archive, Restore tool can SEE the Data, and I have specified
> the
source and destination client as being different (Destination now being
SERVER001) however when performing the restore it shows the following in
activity monitor....
> ?
> Activity Monitor shows....
> 08/06/2006 06:43:48 - begin Restore
> 08/06/2006 06:43:51 - 1 images required
> 08/06/2006 06:43:51 - media 0234L3 required
> 08/06/2006 06:43:51 - media 0236L3 required
> 08/06/2006 06:44:26 - restored image 194.35.68.208_1148074371 -
> (cannot
connect to server backup restore manager(205))
> 08/06/2006 06:44:26 - end Restore; elapsed time: 00:00:38
> the restore failed to recover the requested files(5)
> ?
> I came in early to do this, as I feared something like this may happen
> when
I was in bed last night!!
> ?
> Im starting to lose faith in not only Veritas, but also the people
surrounding me!
> ?
> Any help or quick answers would be appreciated.
> Regards
> Simon Weaver
> 3rd Line Technical Support
> Windows Domain Administrator
> EADS Astrium Limited, B32AA IM (DCS)
> Anchorage Road, Portsmouth, PO3 5PU
> Email: Simon.Weaver at Astrium-eads.net
> ?
This email is for the intended addressee only.
> If you have received it in error then you must not use, retain,
disseminate
or otherwise deal with it.
> Please notify the sender by return email.
> The views of the author may not necessarily constitute the views of
EADS
Astrium Limited.
> Nothing in this email shall bind EADS Astrium Limited in any contract
or
obligation.
>
> EADS Astrium Limited, Registered in England and Wales No. 2449259
> Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1
2AS,
England
>
--
Cybercity Webhosting (http://www.cybercity.dk)
This email is for the intended addressee only.
If you have received it in error then you must not use, retain,
disseminate or otherwise deal with it.
Please notify the sender by return email.
The views of the author may not necessarily constitute the views of EADS
Astrium Limited.
Nothing in this email shall bind EADS Astrium Limited in any contract or
obligation.
EADS Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS,
England
------------------------------
Message: 4
Date: Thu, 8 Jun 2006 20:23:20 +1000
From: "Jim McD" <jim222mcd at gmail.com>
Subject: Re: [Veritas-bu] MS Windows Java console and firewall - what
ports - resolution
To: veritas-bu at mailman.eng.auburn.edu
Message-ID:
<4368705b0606080323s4d57c108n29cad6fcc65a03fd at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Most of those in the listed, its in the manual what it not documented
that
well is ...........
On you desktop go to C:\Program Files\Veritas\java or where the
desktop
client is installed in there lives files with names of the format
hostname.vrtsnbuj
Change the line SET NBJAVA_CONNECT_OPTION= to have the value 1 the
default
is zero it should look like this
SET NBJAVA_CONNECT_OPTION=1
Do this to all files hostname.vrtsnbuj
Test impact on conectivity to other master servers - there should be
none.
Netbackup appears to grab any of these files irrespective of which host
its
connected to. If you have a specific match to the master you are
connecting
and set it as above. It may not work cause its a different .vrtsnbuj
........very dodgy....another example of rainforest software.
On 6/5/06, Jim McD <jim222mcd at gmail.com> wrote:
>
> Hi
>
> I'm getting conflicting information from different sources regarding
which
> ports to open to permit the MS Windows console to connect to a 5.1
master
> server. Are all the following really necessary?
>
> NetBackup Services Registered Ports
> bpcd 13782
> bpdbm 13721
> bprd 13720
> vnetd 13724
> vopied 13783
> bpjava-msvc 13722
> I assume this is IP & UDP, somebody from Symantec also mention ICMP ?
> Any changes needed on the master server?
>
> Regards Jim
>
--
Regards Jim
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20060608/
0f8e6bd8/attachment-0001.html
------------------------------
Message: 5
Date: Thu, 8 Jun 2006 10:13:55 -0400
From: "Hillman, Eric" <Eric.Hillman at blackrock.com>
Subject: [Veritas-bu] How to only stop new disk to tape jobs from
starting
To: <veritas-bu at mailman.eng.auburn.edu>
Message-ID:
<3C4E0B20816AAA46A4385F63D7FC7FE108FA3F at DELPEXV004.na.blkint.com>
Content-Type: text/plain; charset="us-ascii"
We use disk staging in NBU 5.0 MP5. Our backups to disk were greatly
delayed last night and are now contending with the disk to tape jobs.
We've manually killed all duplication jobs, but new ones keep starting
based on the schedule we set. Does anyone know of a way besides
stopping bprd to stop only the Duplication jobs from starting? Thanks!
-Eric
THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE
PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM
DISCLOSURE. If the reader of this message is not the intended recipient,
you are hereby notified that any dissemination, distribution, copying or
use of this message and any attachment is strictly prohibited. If you
have received this message in error, please notify us immediately by
replying to the message and permanently delete it from your computer and
destroy any printout thereof.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20060608/
a6a175d6/attachment.html
------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu at mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
End of Veritas-bu Digest, Vol 2, Issue 32
*****************************************
This message may contain privileged and/or confidential information. If
you have received this e-mail in error or are not the intended recipient, you
may not use, copy, disseminate or distribute it; do not open any attachments,
delete it immediately from your system and notify the sender promptly by e-mail
that you have done so. Thank you.
|