You input new drives - did you run the device configuration wizard again.

And also, just to confirm, is all the drives online and connected correctly?

Thank you



Regards

Simon Weaver
3rd Line Technical Support
Windows Domain Administrator

EADS Astrium Limited, B32AA IM (DCS)
Anchorage Road, Portsmouth, PO3 5PU

Email:  <mailto:Simon.Weaver at Astrium-eads.net> Simon.Weaver at 
Astrium-eads.net

-----Original Message-----
From: Yoseph Leleputra [mailto:leleputra at yahoo.com]
Sent: 24 May 2006 10:03
To: veritas-bu at mailman.eng.auburn.edu
Subject: [Veritas-bu] inventory failed


Dear NBU expert

i got a problem when running inventory robot at ADIC I2000.
This problem comes after i add 2 new drive at  I2000 library
My enviroment is NBU 5.1 with Sun Solaris 8 server as master server
Using ADIC I2000 and 10 drives LTO 2
The message i got is

inventory failed. Unable to initiate robot ( 204 )

What i had done to solve this problem is Stop and Start NBU after IPL
library but Still failed at inventory .

Now i hope someone who ever got same problem could share his experience with
me

Thanks in advance
Yoseph



  _____ 

Ring'em or ping'em. Make PC-to-phone
<http://us.rd.yahoo.com/mail_us/taglines/postman11/*http://us.rd.yahoo.com/e
vt=39666/*http://voice.yahoo.com> calls as low as 1?/min with Yahoo!
Messenger with Voice.



This email is for the intended addressee only.
If you have received it in error then you must not use, retain, disseminate or 
otherwise deal with it.
Please notify the sender by return email.
The views of the author may not necessarily constitute the views of EADS 
Astrium Limited.
Nothing in this email shall bind EADS Astrium Limited in any contract or 
obligation.

EADS Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20060524/9d581c5c/attachment.html