[Veritas-bu] Using scratch pool with mixed libraries
2006-05-02 11:52:37
You said you configured the duplication script to use a pool containing
only LTO3 media. This isn't the way media is selected.
It's all about the storage unit. You'll have to specify a destination
storage unit that is defined to use LTO3 carts, then the duplication
will write to the appropriate media type.
-M
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of Kathryn
Hemness
Sent: Tuesday, May 02, 2006 8:09 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Using scratch pool with mixed libraries
Greetings --
All of my backups are written to disk storage units and then I use
scripts to duplicate the images to tape.
Originally, my libray had 4 LTO2 tapedrives and I've added 2 LTO3
drives.
I can successfully duplicate backup images to LTO2 tapes with the LTO3
drives configured as HCART3, but I haven't been able to force NetBackup
to use LTO3 tapes on the drives when the drives are configured as
HCART3.
I've configured the duplication scripts to use a pool containing only
LTO3 media, but NetBackup insists on pulling tapes from the scratch pool
containing
LTO2 media.
Is there anyone here using a scratch pool with a single library
containing multiple types of tape drives and media?
--kathy
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|