It's not vm.conf, it's tpconfig.

Be sure which drives are the shared ones, ie /dev/rmt/x on server1 is
/dev/rmtY on server2.  Then carefully setup the drives as shared drives via
tpconfig.  

vm.conf is plain.

Really, the manual is your friend on an SSO setup.

-M

-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of Kathryn
Hemness
Sent: Friday, January 27, 2006 2:26 PM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Examples of SSO vm.conf files


Greetings -

I'm trying to setup SSO for an LTO2 library shared between a Solaris 9
Master and a RHEL3 Linux Media server.  Can someone give me examples of
the vm.conf files on each server?

Right now, I'm using an evaluation license and I can see drives
on both Master and Media servers and the robotic is controlled
by the Master.  However, all of the traffic is still going through
the Master server.  The Master server has a vm.conf but my Linux
media server doesn't.


--kathy
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu