As requested
#
# Copyright (c) 1995-2000 by Sun Microsystems, Inc.
# All rights reserved.
#
#
#pragma ident "@(#)st.conf 1.27 00/08/29 SMI"
#
# This file contains configuration entries for both officially supported
# devices of Sun Microsystems and many 3rd party devices.
#
# The officially supported devices are :
#
# "ARCHIVE Python 28388"
# "ARCHIVE Python 28454"
# "ARCHIVE Python 29279"
# "ARCHIVE VIPER 150"
# "EXABYTE EXB-8200"
# "EXABYTE EXB-8500"
# "EXABYTE EXB-8505"
# "EXABYTE EXB-8900"
# "HP 88780"
# "HP C5683A" Note 1
# "HP C5713A" Note 1
# "Quantum DLT4000"
# "Quantum DLT7000"
# "Quantum DLT8000" Note 1
# "STK 9840" Note 1
# "SUN DLT4000"
# "SUN DLT4700"
# "SUN DLT7000"
# "TANDBERG SLR5"
# "TANDBERG TDC 4200"
# "TANDBERGMLR1"
# "TANDBERGMLR3"
#
# Notes
# -----
# 1 Drive is configured automatically - no entry is needed in st.conf.
#
# The 3rd party devices do apparently work with the configurations listed.
# All the entries have been taken from the net and probably have worked in
# the past, but have not been tested by Sun Microsystems. Use these
entries
# as your starting point for generating your configuration entries.
#
#
#tape-config-list=
# "Emulex MTO2", "Emulex MT02 QIC-11/QIC-24", "MT02",
# "ANRITSU DMT2120", "Unisys 1/2\" Reel", "ANRITSU",
# "ARCHIVE Python 28454","Archive Python 4mm Helical
Scan","ARCH_Python",
# "ARCHIVE Python 29279", "Archive Python 4mm DAT
Stacker","ARCH_Python",
# "ARCHIVE Python 28388", "Archive/Conner CTDX004 4mm DAT",
"Conner2-DAT",
# "ARCHIVE VIPER 150", "Archive QIC-150", "QIC150",
# "ARCHIVE VIPER 255", "Archive QIC-525", "QIC150",
# "DEC DLT2", "DEC DLT", "DLT2",
# "DEC TZ87", "DEC DLT", "DLT2",
# "EXABYTE EXB-2501", "Exabyte EXB-2501 QIC", "EXB-2501",
# "EXABYTE EXB-4200c", "Exabyte 4mm Helical Scan","Exa4200c",
# "EXABYTE EXB-8200", "Exabyte EXB-8200 8mm Helical
Scan","EXB-8200",
# "EXABYTE EXB-8500", "Exabyte EXB-8500 8mm Helical
Scan","EXB-850X",
# "EXABYTE EXB-8505", "Exabyte EXB-8505 8mm Helical
Scan","EXB-850X",
# "EXABYTE EXB8500C", "Exabyte 8500C 8mm Helical Scan",
"EXB-850X",
# "EXABYTE EXB-8900", "Mammoth EXB-8900 8mm Helical
Scan","EXB-8900",
# "FUJITSU M1016B M2483B","Fujitsu 1/2\" Cartridge",
"Fujitsu_comp",
# "FUJITSU M248", "Fujitsu 1/2\" Cartridge",
"Fujitsu_m248x",
# "HP 88780", "HP-88780 1/2\" Reel", "HP_half",
# "HP C1533A", "HP DDS2 4mm DAT loader", "HP_DAT",
# "HP C1553A ", "HP C1553A 4mm DAT", "HP_DAT",
# "HP C1537A", "HP DDS-3 4mm DAT ", "HP_DAT_3",
# "HP C1557A", "HP DDS-3 4mm DAT loader", "HP_DAT_3",
# "HP HP35470A", "HP 35470A 4mm DAT", "HP_DAT",
# "HP HP35480A", "HP 35480A 4mm DAT", "HP_DAT",
# "IBM 03490", "IBM 3490E 1/2\" Cartridge", "CLASS_3490",
# "IBM 9348", "STK 4220 1/2\" Cartridge", "C3490",
# "KENNEDY", "Kennedy 1/2\" Reel", "KENNEDY",
# "LMS", "CDC 1/2\" Cartridge", "LMS",
# "M4 DATA 123107 SCSI", "M4-Data 1/2\" Reel", "M4_DATA",
# "Metrum", "Metrum VHS Cartridge", "MetD",
# "QUANTUM DLT7000", "Quantum DLT7000", "DLT7k-data",
# "SUN DLT7000", "Sun DLT7000", "DLT7k-data",
# "Quantum DLT4000", "Quantum DLT4000", "DLT-data",
# "SUN DLT4000", "DLT4000", "DLT-data",
# "SUN DLT4700", "DLT4700 Library", "DLT-data",
# "R-BYTE RB100", "R-Byte Whozits", "DAT",
# "SONY SDT-5000", "SONY 4mm DAT", "DAT",
# "SONY SDT-5200", "SONY 4mm DAT", "DAT",
# "STK 9490", "STK 9490 1/2\" Cartridge", "CLASS_3490",
# "STK 4280", "STK 4280 1/2\" Cartridge", "C3490",
# "STK", "STK 1/2\" Cartridge", "CLASS_3490",
# "TANDBERG 4100", "Tandberg 4100 QIC", "TAND_4100_QIC",
# "TANDBERG 4200", "Tandberg 4200 QIC", "TAND_4200_QIC",
# "TANDBERG TDC 4200", "Tandberg QIC 2.5 Gig Tape Drive",
"TANDB-2_5G",
# "TANDBERG SLR5", "Tandberg 8 Gig QIC", "TAND-8G-VAR",
# "TANDBERGMLR1", "Tandberg MLR1 QIC", "TANDBERG_MLR1",
# "TANDBERGMLR3", "Tandberg 50 Gig QIC", "TAND-50G-VAR",
# "TELEX", "STK 4220 1/2\" Cartridge", "C3490",
# "WANGTEK 51000 SCSI", "Wangtek 1.2GB QIC", "WtQIC",
# "WANGTEK 5150ES", "Wangtek QIC-150", "WANGTEK_QC150",
# "WANGTEK 5525ES SCSI", "Wangtek 525MB QIC", "WtQIC",
# "WANGTEK 6130-HS", "Wangtek 4mm Helical Scan",
"WANGTEK_6130",
# "WangDAT Model 2600", "WangDAT 4mm DAT", "WangDAT",
# "WangDAT Model 3400", "WangDAT 4mm DAT", "WangDAT",
# "WangDAT", "Wang DAT 3.81 Helical Scan", "WangDAT",
# "\076\000", "Fujitsu 1/2\" Cartridge", "Fujitsu_half";
#ANRITSU = 1,0x25,0,0x41d,4,0x00,0x02,0x03,0x03,1;
#ARCH_Python= 1,0x2c,0,0xde39,4,0x00,0x8c,0x8c,0x8c,3;
#CLASS_3490 = 1,0x24,0,0x1c43d,1,0x00,0;
#C3490 = 1,0x24,0,0x1c43d,4,0x00,0x00,0x00,0x01,2;
#Conner2-DAT= 1,0x2c,0,0xde39,1,0x00,0;
#DAT = 1,0x34,0,0x0439,1,0x00,0;
#DLT2 = 1,0x38,0,0xd639,4,0x17,0x18,0x80,0x81,2;
#DLT-data = 1,0x38,0,0xD639,4,0x80,0x81,0x82,0x83,2;
#DLT7k-data = 1,0x38,0,0xD639,4,0x82,0x83,0x84,0x85,2;
#EXB-2501 = 1,0x28,1024,0x442,1,0x00,0;
#EXB-8200 = 1,0x28,0,0x8c79,1,0x00,0;
#EXB-850X = 1,0x29,0,0xce39,4,0x14,0x15,0x8c,0x8c,1;
#EXB-8900 = 1,0x29,0,0x19E39,4,0x27,0x27,0x27,0x27,3;
#Exa4200c = 1,0x34,0,0x1639,2,0x63,0x0,1;
#Fujitsu_comp = 1,0x21,0,0x18639,4,0x00,0x00,0x00,0x09,1;
#Fujitsu_half = 1,0x21,0,0x63b,1,0x00,0;
#Fujitsu_m248x = 1,0x21,0,0xc639,1,0x00,0;
#HP_DAT = 1,0x34,0,0x19679,1,0x0,0;
#HP_DAT_3 = 1,0x34,0,0x9639,4,0x00,0x8c,0x8c,0x8c,1;
#HP_half = 1,0x23,0,0x41d,4,0x01,0x02,0x03,0xc3,1;
#KENNEDY = 1,0x22,0,0x41d,4,0x01,0x02,0x03,0x03,1;
#LMS = 1,0x20,0,0x66b,1,0x00,0;
#M4_DATA = 1,0x27,0,0x49d,4,0x01,0x02,0x06,0x06,1;
#MT02 = 1,0x14,512,0x202,4,0x84,0x05,0x05,0x05,1;
#MetD = 1,0x36,0,0x1639,1,0x00,0;
#QIC150 = 1,0x15,512,0x642,1,0x00,0;
#TANDB-2_5G = 1,0x32,0,0xD67b,1,0x0,0;
#TAND-8G-VAR = 1,0x37,0,0x963b,4,0xA0,0xD0,0xD0,0xD0,3;
#TANDBERG_MLR1 = 1,0x32,512,0x463a,1,0x00,0;
#TAND-50G-VAR = 1,0x37,0,0x963b,4,0xA0,0xD0,0xD0,0xD0,3;
#TAND_4100_QIC = 1,0x32,512,0x463a,1,0x00,0;
#TAND_4200_QIC = 1,0x32,512,0x463a,1,0x00,0;
#WANGTEK_6130 = 1,0x2a,0,0x659,1,0x00,0;
#WANGTEK_QC150 = 1,0x16,512,0x642,1,0x00,0;
#WangDAT = 1,0x2b,0,0x659,1,0x00,0;
#WangDAT = 1,0x34,0,0x0679,1,0x00,0;
#WtQIC = 1,0x32,512,0x467a,1,0x00,0;
#
tape-config-list=
# "STK T9940A", "STK 9940 Tape Drive","CLASS_T9940A",
"STK T9940B", "STK 9940 Tape Drive","CLASS_T9940B";
#CLASS_T9940A = 1,0x36,0,0x1d639,1,0x00,0;
CLASS_T9940B = 2,0x39,0,0x18619,4,0
x0,0x44,0x44,0x44,0,0,240,0,10800,0,0,12600;
#CLASS_T9940B = 1,0x36,0,0x1d639,1,0x00,0;
# This line adds support for Fibre Channel Tapes
name="st" parent="fp" target=0;
name="st" class="scsi" target=0 lun=0;
name="st" class="scsi" target=0 lun=1;
name="st" class="scsi" target=1 lun=0;
name="st" class="scsi" target=1 lun=1;
name="st" class="scsi" target=2 lun=0;
name="st" class="scsi" target=2 lun=1;
name="st" class="scsi" target=3 lun=0;
name="st" class="scsi" target=3 lun=1;
name="st" class="scsi" target=4 lun=0;
name="st" class="scsi" target=4 lun=1;
name="st" class="scsi" target=5 lun=0;
name="st" class="scsi" target=5 lun=1;
name="st" class="scsi" target=6 lun=0;
name="st" class="scsi" target=6 lun=1;
name="st" class="scsi" target=8 lun=0;
name="st" class="scsi" target=8 lun=1;
name="st" class="scsi" target=9 lun=0;
name="st" class="scsi" target=9 lun=1;
name="st" class="scsi" target=10 lun=0;
name="st" class="scsi" target=10 lun=1;
name="st" class="scsi" target=11 lun=0;
name="st" class="scsi" target=11 lun=1;
name="st" class="scsi" target=12 lun=0;
name="st" class="scsi" target=12 lun=1;
name="st" class="scsi" target=13 lun=0;
name="st" class="scsi" target=13 lun=1;
name="st" class="scsi" target=14 lun=0;
name="st" class="scsi" target=14 lun=1;
name="st" class="scsi" target=15 lun=0;
name="st" class="scsi" target=15 lun=1;
name="st" class="scsi" target=16 lun=0;
name="st" class="scsi" target=16 lun=1;
name="st" class="scsi" target=17 lun=0;
name="st" class="scsi" target=17 lun=1;
name="st" class="scsi" target=18 lun=0;
name="st" class="scsi" target=18 lun=1;
name="st" class="scsi" target=19 lun=0;
name="st" class="scsi" target=19 lun=1;
name="st" class="scsi" target=20 lun=0;
name="st" class="scsi" target=20 lun=1;
name="st" class="scsi" target=21 lun=0;
name="st" class="scsi" target=21 lun=1;
name="st" class="scsi" target=22 lun=0;
name="st" class="scsi" target=22 lun=1;
name="st" class="scsi" target=23 lun=0;
name="st" class="scsi" target=23 lun=1;
name="st" class="scsi" target=24 lun=0;
name="st" class="scsi" target=24 lun=1;
name="st" class="scsi" target=25 lun=0;
name="st" class="scsi" target=25 lun=1;
name="st" class="scsi" target=26 lun=0;
name="st" class="scsi" target=26 lun=1;
name="st" class="scsi" target=27 lun=0;
name="st" class="scsi" target=27 lun=1;
name="st" class="scsi" target=28 lun=0;
name="st" class="scsi" target=28 lun=1;
name="st" class="scsi" target=29 lun=0;
name="st" class="scsi" target=29 lun=1;
name="st" class="scsi" target=30 lun=0;
name="st" class="scsi" target=30 lun=1;
name="st" class="scsi" target=31 lun=0;
name="st" class="scsi" target=31 lun=1;
name="st" class="scsi" target=32 lun=0;
name="st" class="scsi" target=32 lun=1;
# This line adds support for Fibre Channel Tapes
name="st" parent="fp" target=0;
Tony
|---------+--------------------------------------->
| | "Richard Hellier" |
| | <richard_hellier AT hotmail DOT com|
| | > |
| | Sent by: |
| | veritas-bu-admin AT mailman DOT eng|
| | .auburn.edu |
| | |
| | |
| | 20/09/2005 16:57 |
| | |
|---------+--------------------------------------->
>------------------------------------------------------------------------------------------------------------------------------|
|
|
| To: <veritas-bu AT mailman.eng.auburn DOT edu>
|
| cc: <ms_nbu AT mac DOT com>
|
| Subject: [Veritas-bu] Anyone got a st.conf entry for STK 9940B ?
(was Tape Error -> Error for Command: space) |
>------------------------------------------------------------------------------------------------------------------------------|
Folks,
Does anyone have a st.conf entry for the STK STK 9940B drive,
please? I think this will fix Mirko's problem.
Cheers,
Richard.
-----Original Message-----
From: ms_nbu AT mac DOT com [mailto:ms_nbu AT mac DOT com]
Sent: 20 September 2005 11:05
To: Richard Hellier
Subject: RE: [Veritas-bu] Tape Error -> Error for Command: space
Richard,
good answer, thanks a lot! I'm using the default st.conf for my STK STK
9940B drives...
The device configuration manual has a st.conf included that states the
9940B
as a
60GB device which is not really correct as we use 200Gb cartridges... any
idea what to
do?
Thanks a lot!
Take care,
-- Mirko
On Tuesday, September 20, 2005, at 11:41AM, Richard Hellier
<richard_hellier AT hotmail DOT com> wrote:
>Mirko,
> One thing to check -- do you have the correct descriptions of
the
>tape devices in your "st.conf" file? If not, N/B may be thinking it can
get
>more on the tape than is possible ...
>
>Good Luck!
>
>Richard.
>
>
>-----Original Message-----
>From: veritas-bu-admin AT mailman.eng.auburn DOT edu
>[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of
ms_nbu AT mac DOT com
>Sent: 20 September 2005 07:54
>To: veritas-bu AT mailman.eng.auburn DOT edu
>Subject: [Veritas-bu] Tape Error -> Error for Command: space
>
>Hi there,
>
>I've got a problem in my newly set up NetBackup 5.1 environment. Some
backup
>jobs failed with the following error:
>
>scsi: [ID 107833 kern.warning] WARNING:
>/pci@1d,700000/SUNW,qlc@2,1/fp@0,0/st@w500104f00077743e,0 (st25):
>Error for Command: space Error Level: Fatal
>scsi: [ID 107833 kern.notice] Requested Block: 1
>Error Block: 1
>scsi: [ID 107833 kern.notice] Vendor: STK
>Serial Number: .402
>scsi: [ID 107833 kern.notice] Sense Key: Media Error
>scsi: [ID 107833 kern.notice] ASC: 0x0 (<vendor unique code 0x0>),
>ASCQ: 0x2, FRU: 0x0
>scsi: [ID 107833 kern.notice] End-of-Media Detected
>
>Shouldn't NBU automatically detect end of media and select new media when
>appropriate? I'm sure I did something wrong, any ideas about it?
>
>Thanks a lot,
>
>-- Mirko
>
>_______________________________________________
>Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
>http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
>
Herzliche Grüße,
Mirko Schlottke
----------------------------------------------------
-- Mirko Schlottke - IT-Consulting ---
- Waterloostr. 31 - 22769 Hamburg --
--- Phone +49 (0)40 43253868 --------
------ Cell +49 (0)175 1604033 ---------
-------- Fax +49 (0)40 43182524 -------
- info AT mirko-schlottke DOT de --------------
----------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|