Server: Sun 280R
Card: *SUN* 2342 Dual Port HBA (uses QLC driver)
Switch: Brocade Silkworm 3250.
I need some assistance getting a Sun 280R to see tape drives attached to
a Brocade 3250 switch.
[switch] -> box (port 0)
-> tape1 (port 1)
-> tape2 (port 2)
-> tape3 (port 3)
-> tape4 (port 4)
Here are my devices according to a Brocade Silkworm 3820.
I am not sure I am adding the zones correctly.
Basically, I want one zone per drive:
DRIVE1<->ZONE1
DRIVE2<->ZONE2
DRIVE3<->ZONE3
DRIVE4<->ZONE4
However, my first step is just to get the Solaris 10 box to see all four
tape drives.
Here are the devices:
s3250:admin> nsshow
{
Type Pid COS PortName NodeName
TTL(sec)
N 010000; 3;21:00:00:e0:8b:14:12:05;20:00:00:e0:8b:14:12:05; na
FC4s: FCIP FCP
Fabric Port Name: 20:00:00:05:1e:35:78:77
NL 010155; 3;50:01:04:f0:00:52:cf:1f;50:01:04:f0:00:52:cf:1e; na
FC4s: FCP [HP Ultrium 2-SCSI K4B0]
Fabric Port Name: 20:01:00:05:1e:35:78:77
NL 010255; 3;50:01:04:f0:00:52:cf:22;50:01:04:f0:00:52:cf:21; na
FC4s: FCP [HP Ultrium 2-SCSI K4B0]
Fabric Port Name: 20:02:00:05:1e:35:78:77
NL 010355; 3;50:01:04:f0:00:52:cf:1c;50:01:04:f0:00:52:cf:1b; na
FC4s: FCP [HP Ultrium 2-SCSI K4B0]
Fabric Port Name: 20:03:00:05:1e:35:78:77
NL 010455; 3;50:01:04:f0:00:52:cf:25;50:01:04:f0:00:52:cf:24; na
FC4s: FCP [HP Ultrium 2-SCSI K4B0]
Fabric Port Name: 20:04:00:05:1e:35:78:77
The Local Name Server has 5 entries }
s3250:admin> zonecreate "greenzone", "3,21; 3,50"
s3250:admin> zonecreate "redzone", "21:00:00:e0:8b:14:12:05; 4,3"
s3250:admin> cfgsave
--
On the Solaris side of the fence:
I believe c3 and c4 is the Sun QLogic (QLC) 2342 adapter.
bash-3.00# cfgadm -c configure c4
bash-3.00#
bash-3.00# cfgadm -alv
Ap_Id Receptacle Occupant Condition
Information
When Type Busy Phys_Id
c0 connected configured unknown
bash-3.00# cfgadm -c configure c4 ; cfgadm -alv
Ap_Id Receptacle Occupant Condition
Information
When Type Busy Phys_Id
c0 connected configured unknown
unavailable scsi-bus n /devices/pci@8,700000/scsi@6:scsi
c0::dsk/c0t6d0 connected configured unknown
TOSHIBA DVD-ROM SD-M1401
unavailable CD-ROM n
/devices/pci@8,700000/scsi@6:scsi::dsk/c0t6d0
c1 connected configured unknown
unavailable fc-private n
/devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc
c1::2100000c500187f5 connected configured unknown
SEAGATE ST373307FSUN72G
unavailable disk y
/devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc::2100000c500187f5
c1::2100000c50018daa connected configured unknown
SEAGATE ST373307FSUN72G
unavailable disk n
/devices/pci@8,600000/SUNW,qlc@4/fp@0,0:fc::2100000c50018daa
c2 connected unconfigured unknown
unavailable scsi-bus n /devices/pci@8,700000/scsi@6,1:scsi
c3 connected unconfigured unknown
unavailable fc-fabric n
/devices/pci@8,600000/SUNW,qlc@1/fp@0,0:fc
c4 connected unconfigured unknown
unavailable fc n
/devices/pci@8,600000/SUNW,qlc@1,1/fp@0,0:fc
usb0/1 empty unconfigured ok
unavailable unknown n /devices/pci@8,700000/usb@5,3:1
usb0/2 empty unconfigured ok
unavailable unknown n /devices/pci@8,700000/usb@5,3:2
usb0/3 empty unconfigured ok
unavailable unknown n /devices/pci@8,700000/usb@5,3:3
usb0/4 empty unconfigured ok
unavailable unknown n /devices/pci@8,700000/usb@5,3:4
bash-3.00#
Does anyone have a good doc for attaching Fiber Channel Tape Drives to a
brocade switch and then getting Solaris to see the devices? :)
Thanks!
Justin.
|