Dear all,

After Re-install master server (master server crash)
there are 2 media servers ( all 3 media servers)
cannot backup using their storage unit (but successful
using master server storage unit) The error is
?storage unit is not available status 219? but the
other one can backup using its storage unit,

My question is:  is it because the license issue or
communication problem ?

Veritas netbackup 5.1

Library SL500 Storagetek 4 drives

 

Please advice..

 

Here is the error when running tail command.

bash-2.05# tail -f /var/adm/messages

May 11 18:43:17 DCDBSFES01 ltid[5260]: [ID 267436
daemon.error] Cannot register 

shared drives for host DCDBSFES01 on host DCBACMIS01:
cannot connect to vmd

May 11 18:43:20 DCDBSFES01 vmd[4835]: [ID 631293
daemon.notice] terminating - su

ccessful (0)

May 11 18:43:20 DCDBSFES01 vmd[4835]: [ID 715111
daemon.error] volume daemon ter

minating because it received a signal (15)

May 11 18:43:20 DCDBSFES01 vmd[4835]: [ID 164182
daemon.error] terminating - dae

mon terminated (7)

May 11 18:44:21 DCDBSFES01 vmd[5720]: [ID 617826
daemon.notice] ready for connec

tions

May 11 18:44:25 DCDBSFES01 tldd[5760]: [ID 947739
daemon.error] TLD(0) going to 

UP state

May 11 18:44:30 DCDBSFES01 avrd[5763]: [ID 756242
daemon.notice] st.conf configu

ration for HPUltrium2-SCSI3 (device 0), name [HP
Ultrium LTO 2], vid [HP      Ul

trium 2*], type 0x3b, block size 0, options 0x18619
(see st(7D) man page)

May 11 18:44:30 DCDBSFES01 avrd[5763]: [ID 996336
daemon.notice] st.conf configu

ration for HPUltrium2-SCSI2 (device 1), name [HP
Ultrium LTO 2], vid [HP      Ul

trium 2*], type 0x3b, block size 0, options 0x18619
(see st(7D) man page)

May 11 18:44:30 DCDBSFES01 avrd[5763]: [ID 336449
daemon.notice] st.conf configu

ration for HPUltrium2-SCSI1 (device 2), name [HP
Ultrium LTO 2], vid [HP      Ul

trium 2*], type 0x3b, block size 0, options 0x18619
(see st(7D) man page)

May 11 18:44:30 DCDBSFES01 avrd[5763]: [ID 576543
daemon.notice] st.conf configu

ration for HPUltrium2-SCSI0 (device 3), name [HP
Ultrium LTO 2], vid [HP      Ul

trium 2*], type 0x3b, block size 0, options 0x18619
(see st(7D) man page)

 

Best Regards, 
Hermawan 
Customer Support Engineer



 



                
__________________________________ 
Do you Yahoo!? 
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/