Dear all,
After Re-install master server (master server crash) there are 2 media
servers ( all 3 media servers) cannot backup using their storage unit
(but successful using master server storage unit) The error is "storage
unit is not available status 219" but the other one can backup using its
storage unit,
My question is: is it because the license issue or communication
problem ?
Veritas netbackup 5.1
Library SL500 Storagetek 4 drives
Please advice..
Here is the error when running tail command.
bash-2.05# tail -f /var/adm/messages
May 11 18:43:17 DCDBSFES01 ltid[5260]: [ID 267436 daemon.error] Cannot
register
shared drives for host DCDBSFES01 on host DCBACMIS01: cannot connect to
vmd
May 11 18:43:20 DCDBSFES01 vmd[4835]: [ID 631293 daemon.notice]
terminating - su
ccessful (0)
May 11 18:43:20 DCDBSFES01 vmd[4835]: [ID 715111 daemon.error] volume
daemon ter
minating because it received a signal (15)
May 11 18:43:20 DCDBSFES01 vmd[4835]: [ID 164182 daemon.error]
terminating - dae
mon terminated (7)
May 11 18:44:21 DCDBSFES01 vmd[5720]: [ID 617826 daemon.notice] ready
for connec
tions
May 11 18:44:25 DCDBSFES01 tldd[5760]: [ID 947739 daemon.error] TLD(0)
going to
UP state
May 11 18:44:30 DCDBSFES01 avrd[5763]: [ID 756242 daemon.notice] st.conf
configu
ration for HPUltrium2-SCSI3 (device 0), name [HP Ultrium LTO 2], vid [HP
Ul
trium 2*], type 0x3b, block size 0, options 0x18619 (see st(7D) man
page)
May 11 18:44:30 DCDBSFES01 avrd[5763]: [ID 996336 daemon.notice] st.conf
configu
ration for HPUltrium2-SCSI2 (device 1), name [HP Ultrium LTO 2], vid [HP
Ul
trium 2*], type 0x3b, block size 0, options 0x18619 (see st(7D) man
page)
May 11 18:44:30 DCDBSFES01 avrd[5763]: [ID 336449 daemon.notice] st.conf
configu
ration for HPUltrium2-SCSI1 (device 2), name [HP Ultrium LTO 2], vid [HP
Ul
trium 2*], type 0x3b, block size 0, options 0x18619 (see st(7D) man
page)
May 11 18:44:30 DCDBSFES01 avrd[5763]: [ID 576543 daemon.notice] st.conf
configu
ration for HPUltrium2-SCSI0 (device 3), name [HP Ultrium LTO 2], vid [HP
Ul
trium 2*], type 0x3b, block size 0, options 0x18619 (see st(7D) man
page)
Best Regards,
Hermawan
Customer Support Engineer
|
