It is on the roadmap and supposedly is coming next release.  But that's
all heresy, uh.....hearsay.

~JK

-----Original Message-----
From: Tim Hoke [mailto:thoke AT northpeak DOT com] 
Sent: Thursday, November 11, 2004 2:35 PM
To: Sto Rage(c) 
Cc: Kennedy, Jeffrey; bryan_bahnmiller AT agilent DOT com;
veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] NetApp NDMP over SAN

As long as it still comes up to the NetApp as the same device, NetBackup

wouldn't care.

And I thought I heard somewhere that VERITAS had SSO on the roadmap for 
NDMP... But I could be off on that... Check with your local reps to see 
for sure.

-Tim

On Thu, 11 Nov 2004, Sto Rage(c)  wrote:

> Are you sure? I don't think its as simple as changing the zoning. 
> What happens to the config on the media server controlling the
library? 
> 
> On Thu, 11 Nov 2004 13:21:00 -0800, Kennedy, Jeffrey
> <jkennedy AT qualcomm DOT com> wrote:
> > It's a lot easier to re-allocate if necessary.  For instance if the
> > bridge goes out or the drive takes a dirt nap all you need to do to
> > still get backups over fc is change the zoning.
> > 
> > ~JK
> > 
> > 
> > 
> > -----Original Message-----
> > From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> > [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of Sto
> > Rage(c)
> > Sent: Thursday, November 11, 2004 11:41 AM
> > To: bryan_bahnmiller AT agilent DOT com
> > Cc: veritas-bu AT mailman.eng.auburn DOT edu
> > Subject: Re: [Veritas-bu] NetApp NDMP over SAN
> > 
> > We have something similar, but note that...
> > Veritas doesn't support SSO on NDMP drives, you will have to
dedicate
> > the tape drives exclusively to the Netapp. So why connect via the
> > switch?
> > We have it this way,
> > R150-->STK SN3250-->2 drives on STK L700 (LTO-1)
> > hope this helps
> > -G
> > 
> > On Thu, 11 Nov 2004 11:17:26 -0700, bryan_bahnmiller AT agilent DOT com
> > <bryan_bahnmiller AT agilent DOT com> wrote:
> > > All,
> > >
> > >  We are looking at bringing a NetApp FAS270 into our tape SAN. Our
> > current tape SAN has Windows and HPUX hosts connected through an EMC
> > Connectrix ED64M (McData 6064) to ADIC Pathlights to IBM LTO1 drives
in
> > a Scalar 10K.
> > >
> > >  NetApp states that:
> > >
> > > FAS270 --> Brocade --> Pathlight --> LTO drives (in a 10K)
> > > and
> > > FAS270 --> McData --> Scalar I2K
> > >
> > > are both certified.
> > >
> > >  Has anyone done this with the EMC re-badged McData?
> > > FAS270 --> EMC 64M --> Pathlight --> LTO drives (in a 10K)
> > >
> > >  We will try it as soon as we get a loaner FAS270 in, but I am
curious
> > if anyone else has done this before.
> > >
> > >  Thanks,
> > >  Bryan
> > >
> > > Bryan Bahnmiller
> > > Agilent Technologies
> > > Colorado Springs, CO
> > > bryan_bahnmiller AT agilent DOT com
> > >
> > > _______________________________________________
> > > Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> > > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > >
> > _______________________________________________
> > 
> > 
> > Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > 
> >
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>