[Veritas-bu] Problem with one volume!
2004-10-27 07:54:59
Subject: |
[Veritas-bu] Problem with one volume! |
From: |
thoke AT northpeak DOT com (Tim Hoke) |
Date: |
Wed, 27 Oct 2004 06:54:59 -0500 (CDT) |
An easier way to determine why the tape is being frozen is to look at the
media errors report.
Either run the report from the GUI or via bperror -media (sorry can't
remember exact syntax at the moment) and you'll see why it's being frozen.
HTH
-Tim
On Wed, 27 Oct 2004, Hardy, Andrew wrote:
> Hi,
>
> This is the correct way to unfreeze media, but it would seem that if it
> is becoming frozen again and again, then it would suggest that the media
> is corrupt. Check through the bptm logs on the media server which is
> handling this media at the time of the problem. If logging is set high
> enough, you should see some indication as to the reason for failure.
> Is the media always mounted in the same drive when it is frozen ? If
> so, you could also look into whether there might be any hardware
> problems with the drive.......most likely to be corrupt media though.
>
> Hope this helps.
>
> Andy Hardy
>
>
> -----Original Message-----
> From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of Albert
> Mamanov
> Sent: 27 October 2004 07:09
> To: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: [Veritas-bu] Problem with one volume!
>
>
> Hi All!
> I have problem with 1 volume in robot.
> Volume I707L1 is frozen. I try unfreeze (bpmedia -unfreeze -ev I707L1).
> But next time i use volume it freeze again.
>
> How can i unfreeze volume correctly?
>
>
|
|
|