[Veritas-bu] Re: Re-introduction of media without barcode reader
2004-08-26 12:34:43
Subject: |
[Veritas-bu] Re: Re-introduction of media without barcode reader |
From: |
ddunham AT taos DOT com (Darren Dunham) |
Date: |
Thu, 26 Aug 2004 09:34:43 -0700 (PDT) |
> >What I am aiming for is the command(s) similar to the above so I can
> re-introduce a tape the already exists in the >media catalog by telling
> NBU that the tape that has just come back from the offsite store is in
> slot number x in >the drive. Much in the same way that can be done via the
> Java GUI on a system that has a barcode reader.
>
> >I hope that the above makes sense (it did to me sometime ago and now my
> head hurts...)
>
> >Thanks in advance
> >Tim
>
> Tim
>
> I do not know a command that would do it, but why not just use the Java
> GUI. You can highlight the tape you want to move from stand-alone. Right
> click and choose move. Check the box for it being in a library. Then
> fill in the info of what slot it is in. I have done this for about a year
> now for tapes without barcodes, and a library that does not have a barcode
> reader.
vmchange should do that.
Change volume residence
/usr/openv/volmgr/bin/vmchange [-h volume_database_host] -res -m
media_id -mt media_type -rt robot_type -rn robot_number -rh
robot_host -v volume_group -rc1 rob_slot [-rc2 rob_side]
--
Darren Dunham ddunham AT taos DOT com
Senior Technical Consultant TAOS http://www.taos.com/
Got some Dr Pepper? San Francisco, CA bay area
< This line left intentionally blank to confuse you. >
|
|
|