Michael,

Check the mappings to the robot.  I had the same issue in HP-UX and my path
to the robot was invalid.  I used the tpconfig utility to change it to the
correct path.  Not sure if you have the same utility in Windows or not.  It
would be under install path/openv/volmgr/bin.

HTH

Sam

-----Original Message-----
From: ida3248b AT post.cybercity DOT dk [mailto:ida3248b AT post.cybercity DOT 
dk]
Sent: Wednesday, July 21, 2004 6:04 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] ltid not active on windows 2000 NBU4.5FP5


Hello All

I have a strange problem on two new windows 2000 media servers. The device 
manager service is started, but vmoprcmd report that ltid is not active.

I have created ../volmgr/debug/daemon and ../volmgr/debug/ltid directory on 
the media servers

Unfortunately I can't seem to find anything in the logs

Any ideas/suggestion appreciated

Regards
Michael

--
Cybercity Webhosting (http://www.cybercity.dk)

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu