Dan -
This is a simple matter of using the wrong option. You listed -rt 0, when is
should be either -rn 0 for Robot Number 0 or -rt acs|tld|etc for Robot Type ACS
or TLD etc.
Try the command again as follows :
vmquery -M master -h master -rn 0 -bx
Rob Thelen
Storage Management
Bank One Card Services.
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of Dan Logcher
Sent: Monday, April 26, 2004 12:31 PM
To: Veritas List
Subject: [Veritas-bu] Media Server tape list
I'm trying to do a vmquery from a Media Server, the volume db is
on the master server. It doesn't return any tapes when I try the
following:
vmquery -M master -h master -rt 0 -bx
But if I run xvmadm and change the volume host to master
I get the list. Am I missing something in vm.conf?
--
Dan
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
**********************************************************************
This transmission may contain information that is privileged, confidential
and/or exempt from disclosure under applicable law. If you are not the intended
recipient, you are hereby notified that any disclosure, copying, distribution,
or use of the information contained herein (including any reliance thereon) is
STRICTLY PROHIBITED. If you received this transmission in error, please
immediately contact the sender and destroy the material in its entirety,
whether in electronic or hard copy format. Thank you
**********************************************************************
|