On Thu, Mar 25, 2004 at 07:02:41AM -0600, Jason_Cordes/US/Enbridge AT
enbridge-us DOT com wrote:
> The only way really to do it is to have your backup storage units add up
> to one less than the total number of drives in your library and then
> create a storage unit with one drive. You cannot really dedicate a
> specific drive for any purpose unless you have the ability within the
> library of partitioning it out.
>
> I'm assuming we are talking about only one library in this and as an
> example you have a 6 drive library. You need 3 storage units for your
> configuration so you'd have two storage units with max concurrent drives
> set to two, one storage unit with max concurrent set to one, and one
> storage unit for restores with max concurrent drives set to one. This way
> when your backups are running there should never be more than 5 drives in
> use and one is always available for restores.
Thanks Jason, but this doesn't really work well. If we were to
implement this, the maximum number of tape drives a single media server
could use would be 2. I would like to be able to have it use 5 drives
if none of the other media servers need a drive.
>From reading every's posts, it sounds like NetBackup simply doesn't
support what I want to do. If we werent' using SSO, it wouldn't be so
bad, but SSO makes it practically impossible.
> -----Original Message-----
> From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of
> ewilts AT ewilts DOT org
> Sent: Wednesday, March 24, 2004 6:19 PM
> To: irodriguez AT arsenaldigital DOT com
> Cc: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: Re: [Veritas-bu] Restore-only tape drives?
>
> On Wed, Mar 24, 2004 at 06:01:47PM -0500, Isidro Rodriguez wrote:
> > Look at your Storage Unit Max concurrent drives and set it to one less.
>
> Unfortunately I have 3 storage units since I've got 3 media servers. If
> I drop a drive from each, they could still overlap. Am I missing
> something here?
>
> Thanks,
> .../Ed
>
> > -----Original Message-----
> > From: Ed Wilts [mailto:ewilts AT ewilts DOT org]
> > Sent: Wednesday, March 24, 2004 5:51 PM
> > To: List Veritas List
> > Subject: [Veritas-bu] Restore-only tape drives?
> >
> >
> > I've asked my local Veritas systems engineer this, and he hasn't found
> > an answer for me yet. How can I set up a drive that is dedicated to
> > restores? We've run into multiple cases where we need to do a restore
> > and all the drives in the library are in use. I'd like the ability to
> > dedicate one drive solely to restores, perhaps for nearline applications
> > or for general restores. We're still at 4.5FP6, 3 media servers
> > (including the master), and SSO..
--
Ed Wilts, Mounds View, MN, USA
mailto:ewilts AT ewilts DOT org
|