Not really the right group but I'd drop the sun box to the bios & experiment
with the "probe-scsi-all" command.  I sound's like you have a scsi conflict
or perhaps a bad scsi device.  Try the simple stuff first, a new terminator,
a new cable, etc. 

To probe the scsi bus from the bios:

setenv auto-boot? false
reset-all
probe-scsi-all

when you're done testing, set auto-boot? back to "true".

-M

-----Original Message-----
From: veritas [mailto:veritas AT amlaw DOT com]
Sent: Tuesday, June 24, 2003 8:27 AM
To: 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: [Veritas-bu] can't figure of the hardware


I am trying to configure E3000 (old Machine) with an L9.  Whenever I
plug it via the diffrential scsi, it stops booting. "no boot device
found"  I have changed the scsi id to c0 t5 and still nothing.  Help!!!

Amlaw


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu