[Veritas-bu] Problem with Netbackup 3.2
2003-06-02 13:47:50
Subject: |
[Veritas-bu] Problem with Netbackup 3.2 |
From: |
wes.neal AT mci DOT com (Wes Neal) |
Date: |
Mon, 02 Jun 2003 13:47:50 -0400 |
This is a multi-part message in MIME format.
--Boundary_(ID_Z4ci6dLU3njsuey/HQNRUw)
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7bit
No change in IP for quite some time
There is only one server and it has been rebooted multiple times since
this problem occured.
# more bp.conf
SERVER = backup
CLIENT_NAME = backup
Which is my server name. Any idea what else could be causing the error
16?
This is a single server with the L1000 hooked directly to it, so I would
think the network would not be involved.
----
Wes Neal
MCI GNMSS - OSS
(813)829-6915
VNET: 838-6915
Sametime: wes.neal
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of Markham,
Richard
Sent: Monday, June 02, 2003 11:33 AM
To: 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: RE: [Veritas-bu] Problem with Netbackup 3.2
i'd say its more of a connection problem as opposed to drive problem.
(1) has there been any change in ip
(2) have you bounced services on both master and media
(3) are the appropriate server= entries in bp.conf on both master media
-----Original Message-----
From: Wes Neal [mailto:wes.neal AT mci DOT com]
Sent: Monday, June 02, 2003 11:27 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] Problem with Netbackup 3.2
Says it is up:
Device Robot Drive Robot Drive Device
Second
Type Num Index Type DrNum Status Comment Name Path
Device Path
robot 0 - TLD - - - - /dev/sg/c2t0l0
drive - 0 dlt 1 UP - Drive0 /dev/rmt/0cbn
----
Wes Neal
MCI GNMSS - OSS
(813)829-6915
VNET: 838-6915
Sametime: wes.neal
-----Original Message-----
From: Teklu, Daniel [mailto:daniel.teklu AT tfn DOT com]
Sent: Monday, June 02, 2003 11:21 AM
To: 'Wes Neal'; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] Problem with Netbackup 3.2
Check if the drive is down? I get that when my drive is down. Check the
status by
# ./tpconfig -l
if it is down, try to bring it up by
# ./vmoprcmd -up Drive_Index
Good Luck
Daniel
-----Original Message-----
From: Wes Neal [mailto:wes.neal AT mci DOT com]
Sent: Monday, June 02, 2003 11:10 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Problem with Netbackup 3.2
Howdy people, hopefully someone can give me some insight on this. I
have had this implementation of Netbackup 3.2 running for about 3 hours
without a hitch and suddenly about 4 weeks ago it quit working. I am
running Solaris 7. Basically whatever Netbackup tries to do it gets an
error 219 or 213. Here is a snippet from the bpsched log:
10:38:24 [1787] <4> bpsched: INITIATING...
10:38:24 [1787] <2> logparams: /usr/openv/netbackup/bin/bpsched 10:38:24
[1787] <4> bpsched_main: wait_on_que=0, timeout_in_que=36000,
reread_interval=30 0,queue_on_error=0, bptm_query_timeout=480 10:38:24
[1787] <4> db_ATTDEFS: Class_att_defs protocol 3.2 10:38:24 [1787] <4>
bpsched_main: VSMInit () failed: 2d
10:38:24 [1787] <4> ?: post process images: yes
10:38:24 [1787] <4> ?: keep tir: yes
10:38:25 [1787] <2> getsockconnected: Connect to backup on port 689
10:38:26 [1787] <2> getsockconnected: Connect to backup on port 529
10:38:27 [1787] <2> getsockconnected: Connect to backup on port 947
10:38:28 [1787] <2> getsockconnected: Connect to backup on port 783
10:38:29 [1787] <2> getsockconnected: Connect to backup on port 593
10:38:30 [1787] <2> getsockconnected: Connect to backup on port 1017
10:38:31 [1787] <2> getsockconnected: Connect to backup on port 787
10:38:32 [1787] <2> getsockconnected: Connect to backup on port 695
10:38:33 [1787] <2> getsockconnected: Connect to backup on port 561
10:38:34 [1787] <2> getsockconnected: Connect to backup on port 641
10:38:35 [1787] <2> getsockconnected: Connect to backup on port 947
10:38:36 [1787] <2> getsockconnected: Connect to backup on port 799
10:38:37 [1787] <2> getsockconnected: Connect to backup on port 721
10:38:38 [1787] <2> getsockconnected: Connect to backup on port 873
10:38:39 [1787] <2> getsockconnected: Connect to backup on port 787
10:38:40 [1787] <2> getsockconnected: Connect to backup on port 647
10:38:41 [1787] <2> getsockconnected: Connect to backup on port 945
10:38:42 [1787] <2> getsockconnected: Connect to backup on port 817
10:38:43 [1787] <2> getsockconnected: Connect to backup on port 947
10:38:44 [1787] <2> getsockconnected: Connect to backup on port 815
10:38:45 [1787] <2> getsockconnected: Connect to backup on port 849
10:38:46 [1787] <2> getsockconnected: Connect to backup on port 729
10:38:47 [1787] <2> getsockconnected: Connect to backup on port 787
10:38:48 [1787] <2> getsockconnected: Connect to backup on port 663
10:38:49 [1787] <2> getsockconnected: Connect to backup on port 817
10:38:50 [1787] <2> getsockconnected: Connect to backup on port 929
10:38:51 [1787] <2> getsockconnected: Connect to backup on port 947
10:38:52 [1787] <2> getsockconnected: Connect to backup on port 831
10:38:53 [1787] <2> getsockconnected: Connect to backup on port 977
10:38:54 [1787] <2> getsockconnected: Connect to backup on port 585
10:38:55 [1787] <2> getsockconnected: Connect to backup on port 787
10:38:56 [1787] <2> getsockconnected: Connect to backup on port 871
10:38:56 [1787] <16> getsockconnected: exceeded timeout of 30 seconds
10:38:56 [1787] <2> getsockconnected: sockfd:-1 timo:32 10:38:56 [1787]
<16> bpcr_connect: Can't connect to client backup 10:38:56 [1787] <16>
start_bptm: connection refused by host backup 10:38:56 [1787] <16>
get_stunits: get_num_avail_drives failed with stat 204 10:38:56 [1787]
<4> get_db_info: no available storage units 10:38:56 [1787] <8>
bpsched_main: failed getting database information 10:38:56 [1787] <16>
log_in_errorDB: scheduler exiting - no storage units available for u se
(213) 10:38:56 [1787] <16> bpsched: scheduler exiting - no storage units
available for use (213
)
I have not seen these before. Any help would be much appreciated.
Thanks
Wes
----
Wes Neal
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
--Boundary_(ID_Z4ci6dLU3njsuey/HQNRUw)
Content-type: text/html; charset=us-ascii
Content-transfer-encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<TITLE>Message</TITLE>
<META content=3D"MSHTML 6.00.2800.1170" name=3DGENERATOR></HEAD>
<BODY>
<DIV><FONT face=3DArial color=3D#0000ff size=3D2><SPAN =
class=3D860004617-02062003>No=20
change in IP for quite some time</SPAN></FONT></DIV>
<DIV><FONT face=3DArial color=3D#0000ff size=3D2><SPAN =
class=3D860004617-02062003>There=20
is only one server and it has been rebooted multiple times since this =
problem=20
occured.</SPAN></FONT></DIV>
<DIV><FONT face=3DArial color=3D#0000ff size=3D2><SPAN =
class=3D860004617-02062003># more=20
bp.conf<BR>SERVER =3D backup<BR>CLIENT_NAME =3D =
backup</SPAN></FONT></DIV>
<DIV><FONT face=3DArial color=3D#0000ff size=3D2><SPAN=20
class=3D860004617-02062003></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial color=3D#0000ff size=3D2><SPAN =
class=3D860004617-02062003>Which=20
is my server name. Any idea what else could be causing the error=20
16?</SPAN></FONT></DIV>
<DIV><FONT face=3DArial color=3D#0000ff size=3D2><SPAN=20
class=3D860004617-02062003></SPAN></FONT> </DIV>
<DIV><FONT face=3DArial color=3D#0000ff size=3D2><SPAN =
class=3D860004617-02062003>This=20
is a single server with the L1000 hooked directly to it, so I would =
think the=20
network would not be involved.</SPAN></FONT></DIV>
<DIV><FONT face=3DArial color=3D#0000ff size=3D2></FONT> </DIV>
<DIV> </DIV><!-- Converted from text/plain format -->
<P><FONT size=3D2>----<BR>Wes Neal<BR>MCI GNMSS - =
OSS<BR>(813)829-6915<BR>VNET:=20
838-6915<BR>Sametime: wes.neal<BR> </FONT> </P>
<BLOCKQUOTE dir=3Dltr style=3D"MARGIN-RIGHT: 0px">
<DIV></DIV>
<DIV class=3DOutlookMessageHeader lang=3Den-us dir=3Dltr =
align=3Dleft><FONT=20
face=3DTahoma size=3D2>-----Original Message-----<BR><B>From:</B>=20
veritas-bu-admin AT mailman.eng.auburn DOT edu=20
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] <B>On Behalf Of =
</B>Markham,=20
Richard<BR><B>Sent:</B> Monday, June 02, 2003 11:33 AM<BR><B>To:</B>=20
'veritas-bu AT mailman.eng.auburn DOT edu'<BR><B>Subject:</B> RE: =
[Veritas-bu]=20
Problem with Netbackup 3.2<BR><BR></FONT></DIV>
<P><FONT size=3D2>i'd say its more of a connection problem as opposed =
to drive=20
problem. </FONT></P>
<P><FONT size=3D2>(1) has there been any change in ip</FONT> <BR><FONT =
size=3D2>(2) have you bounced services on both master and media</FONT> =
<BR><FONT=20
size=3D2>(3) are the appropriate server=3D entries in bp.conf on both =
master=20
media</FONT> </P>
<P><FONT size=3D2>-----Original Message-----</FONT> <BR><FONT =
size=3D2>From: Wes=20
Neal [<A =
href=3D"mailto:wes.neal AT mci DOT com">mailto:wes.neal AT mci DOT
com</A>]</FONT>=20
<BR><FONT size=3D2>Sent: Monday, June 02, 2003 11:27 AM</FONT> =
<BR><FONT=20
size=3D2>To: veritas-bu AT mailman.eng.auburn DOT edu</FONT> <BR><FONT =
size=3D2>Subject:=20
RE: [Veritas-bu] Problem with Netbackup 3.2</FONT> </P><BR>
<P><FONT size=3D2>Says it is up:</FONT> </P>
<P><FONT size=3D2>Device Robot =
Drive =20
=
Robot &n=
bsp; =20
Drive Device</FONT> <BR><FONT size=3D2>Second</FONT> =
<BR><FONT=20
size=3D2>Type Num Index Type DrNum =
Status =20
Comment Name Path</FONT> <BR><FONT =
size=3D2>Device Path</FONT> <BR><FONT =
size=3D2>robot =20
0 - TLD =20
- - =20
- =20
- /dev/sg/c2t0l0</FONT> <BR><FONT=20
size=3D2> drive - =
0 =20
dlt 1 UP =20
- Drive0 =20
/dev/rmt/0cbn</FONT> </P><BR>
<P><FONT size=3D2>----</FONT> <BR><FONT size=3D2>Wes Neal</FONT> =
<BR><FONT=20
size=3D2>MCI GNMSS - OSS</FONT> <BR><FONT =
size=3D2>(813)829-6915</FONT> <BR><FONT=20
size=3D2>VNET: 838-6915</FONT> <BR><FONT size=3D2>Sametime: =
wes.neal</FONT>=20
<BR><FONT size=3D2> </FONT> </P>
<P><FONT size=3D2>-----Original Message-----</FONT> <BR><FONT =
size=3D2>From:=20
Teklu, Daniel [<A=20
href=3D"mailto:daniel.teklu AT tfn DOT com">mailto:daniel.teklu AT tfn DOT
com</A>]=20
</FONT><BR><FONT size=3D2>Sent: Monday, June 02, 2003 11:21 AM</FONT> =
<BR><FONT=20
size=3D2>To: 'Wes Neal'; veritas-bu AT mailman.eng.auburn DOT edu</FONT> =
<BR><FONT=20
size=3D2>Subject: RE: [Veritas-bu] Problem with Netbackup 3.2</FONT> =
</P><BR>
<P><FONT size=3D2>Check if the drive is down? I get that when my drive =
is down.=20
Check the</FONT> <BR><FONT size=3D2>status by</FONT> </P>
<P><FONT size=3D2># ./tpconfig -l</FONT> </P>
<P><FONT size=3D2>if it is down, try to bring it up by</FONT> </P>
<P><FONT size=3D2># ./vmoprcmd -up Drive_Index</FONT> </P>
<P><FONT size=3D2>Good Luck</FONT> <BR><FONT size=3D2>Daniel</FONT> =
</P>
<P><FONT size=3D2>-----Original Message-----</FONT> <BR><FONT =
size=3D2>From: Wes=20
Neal [<A =
href=3D"mailto:wes.neal AT mci DOT com">mailto:wes.neal AT mci DOT
com</A>]</FONT>=20
<BR><FONT size=3D2>Sent: Monday, June 02, 2003 11:10 AM</FONT> =
<BR><FONT=20
size=3D2>To: veritas-bu AT mailman.eng.auburn DOT edu</FONT> <BR><FONT =
size=3D2>Subject:=20
[Veritas-bu] Problem with Netbackup 3.2</FONT> </P><BR>
<P><FONT size=3D2>Howdy people, hopefully someone can give me some =
insight on=20
this. I</FONT> <BR><FONT size=3D2>have had this implementation =
of=20
Netbackup 3.2 running for about 3 hours</FONT> <BR><FONT =
size=3D2>without a=20
hitch and suddenly about 4 weeks ago it quit working. I =
am</FONT>=20
<BR><FONT size=3D2>running Solaris 7. Basically whatever =
Netbackup tries=20
to do it gets an</FONT> <BR><FONT size=3D2>error 219 or 213. =
Here is a=20
snippet from the bpsched log:</FONT> </P>
<P><FONT size=3D2>10:38:24 [1787] <4> bpsched: =
INITIATING...</FONT>=20
<BR><FONT size=3D2>10:38:24 [1787] <2> logparams:=20
/usr/openv/netbackup/bin/bpsched 10:38:24</FONT> <BR><FONT =
size=3D2>[1787]=20
<4> bpsched_main: wait_on_que=3D0, =
timeout_in_que=3D36000,</FONT> <BR><FONT=20
size=3D2>reread_interval=3D30 0,queue_on_error=3D0, =
bptm_query_timeout=3D480=20
10:38:24</FONT> <BR><FONT size=3D2>[1787] <4> db_ATTDEFS: =
Class_att_defs=20
protocol 3.2 10:38:24 [1787] <4></FONT> <BR><FONT =
size=3D2>bpsched_main:=20
VSMInit () failed: 2d</FONT> <BR><FONT size=3D2>10:38:24 [1787] =
<4>=20
?: post process images: yes</FONT> <BR><FONT=20
size=3D2>10:38:24 [1787] <4> ?: keep =
tir: =20
yes</FONT> <BR><FONT size=3D2>10:38:25 [1787] <2> =
getsockconnected:=20
Connect to backup on port 689</FONT> <BR><FONT size=3D2>10:38:26 =
[1787]=20
<2> getsockconnected: Connect to backup on port 529</FONT> =
<BR><FONT=20
size=3D2>10:38:27 [1787] <2> getsockconnected: Connect to backup =
on port=20
947</FONT> <BR><FONT size=3D2>10:38:28 [1787] <2> =
getsockconnected:=20
Connect to backup on port 783</FONT> <BR><FONT size=3D2>10:38:29 =
[1787]=20
<2> getsockconnected: Connect to backup on port 593</FONT> =
<BR><FONT=20
size=3D2>10:38:30 [1787] <2> getsockconnected: Connect to backup =
on port=20
1017</FONT> <BR><FONT size=3D2>10:38:31 [1787] <2> =
getsockconnected:=20
Connect to backup on port 787</FONT> <BR><FONT size=3D2>10:38:32 =
[1787]=20
<2> getsockconnected: Connect to backup on port 695</FONT> =
<BR><FONT=20
size=3D2>10:38:33 [1787] <2> getsockconnected: Connect to backup =
on port=20
561</FONT> <BR><FONT size=3D2>10:38:34 [1787] <2> =
getsockconnected:=20
Connect to backup on port 641</FONT> <BR><FONT size=3D2>10:38:35 =
[1787]=20
<2> getsockconnected: Connect to backup on port 947</FONT> =
<BR><FONT=20
size=3D2>10:38:36 [1787] <2> getsockconnected: Connect to backup =
on port=20
799</FONT> <BR><FONT size=3D2>10:38:37 [1787] <2> =
getsockconnected:=20
Connect to backup on port 721</FONT> <BR><FONT size=3D2>10:38:38 =
[1787]=20
<2> getsockconnected: Connect to backup on port 873</FONT> =
<BR><FONT=20
size=3D2>10:38:39 [1787] <2> getsockconnected: Connect to backup =
on port=20
787</FONT> <BR><FONT size=3D2>10:38:40 [1787] <2> =
getsockconnected:=20
Connect to backup on port 647</FONT> <BR><FONT size=3D2>10:38:41 =
[1787]=20
<2> getsockconnected: Connect to backup on port 945</FONT> =
<BR><FONT=20
size=3D2>10:38:42 [1787] <2> getsockconnected: Connect to backup =
on port=20
817</FONT> <BR><FONT size=3D2>10:38:43 [1787] <2> =
getsockconnected:=20
Connect to backup on port 947</FONT> <BR><FONT size=3D2>10:38:44 =
[1787]=20
<2> getsockconnected: Connect to backup on port 815</FONT> =
<BR><FONT=20
size=3D2>10:38:45 [1787] <2> getsockconnected: Connect to backup =
on port=20
849</FONT> <BR><FONT size=3D2>10:38:46 [1787] <2> =
getsockconnected:=20
Connect to backup on port 729</FONT> <BR><FONT size=3D2>10:38:47 =
[1787]=20
<2> getsockconnected: Connect to backup on port 787</FONT> =
<BR><FONT=20
size=3D2>10:38:48 [1787] <2> getsockconnected: Connect to backup =
on port=20
663</FONT> <BR><FONT size=3D2>10:38:49 [1787] <2> =
getsockconnected:=20
Connect to backup on port 817</FONT> <BR><FONT size=3D2>10:38:50 =
[1787]=20
<2> getsockconnected: Connect to backup on port 929</FONT> =
<BR><FONT=20
size=3D2>10:38:51 [1787] <2> getsockconnected: Connect to backup =
on port=20
947</FONT> <BR><FONT size=3D2>10:38:52 [1787] <2> =
getsockconnected:=20
Connect to backup on port 831</FONT> <BR><FONT size=3D2>10:38:53 =
[1787]=20
<2> getsockconnected: Connect to backup on port 977</FONT> =
<BR><FONT=20
size=3D2>10:38:54 [1787] <2> getsockconnected: Connect to backup =
on port=20
585</FONT> <BR><FONT size=3D2>10:38:55 [1787] <2> =
getsockconnected:=20
Connect to backup on port 787</FONT> <BR><FONT size=3D2>10:38:56 =
[1787]=20
<2> getsockconnected: Connect to backup on port 871</FONT> =
<BR><FONT=20
size=3D2>10:38:56 [1787] <16> getsockconnected: exceeded timeout =
of 30=20
seconds</FONT> <BR><FONT size=3D2>10:38:56 [1787] <2> =
getsockconnected:=20
sockfd:-1 timo:32 10:38:56 [1787]</FONT> <BR><FONT size=3D2><16> =
bpcr_connect: Can't connect to client backup 10:38:56 [1787] =
<16></FONT>=20
<BR><FONT size=3D2>start_bptm: connection refused by host backup =
10:38:56 [1787]=20
<16></FONT> <BR><FONT size=3D2>get_stunits: get_num_avail_drives =
failed=20
with stat 204 10:38:56 [1787]</FONT> <BR><FONT size=3D2><4> =
get_db_info:=20
no available storage units 10:38:56 [1787] <8></FONT> <BR><FONT=20
size=3D2>bpsched_main: failed getting database information 10:38:56 =
[1787]=20
<16></FONT> <BR><FONT size=3D2>log_in_errorDB: scheduler exiting =
- no=20
storage units available for u se</FONT> <BR><FONT size=3D2>(213) =
10:38:56 [1787]=20
<16> bpsched: scheduler exiting - no storage units</FONT> =
<BR><FONT=20
size=3D2>available for use (213</FONT> <BR><FONT size=3D2>)</FONT> =
</P>
<P><FONT size=3D2>I have not seen these before. Any help would =
be much=20
appreciated.</FONT> </P>
<P><FONT size=3D2>Thanks</FONT> <BR><FONT size=3D2>Wes</FONT> </P><BR>
<P><FONT size=3D2>----</FONT> <BR><FONT size=3D2>Wes Neal</FONT> </P>
<P><FONT =
size=3D2>_______________________________________________</FONT>=20
<BR><FONT size=3D2>Veritas-bu maillist - =20
Veritas-bu AT mailman.eng.auburn DOT edu</FONT> <BR><FONT size=3D2><A=20
href=3D"http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu"=20
=
target=3D_blank>http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu=
</A></FONT>=20
</P>
<P><FONT =
size=3D2>_______________________________________________</FONT>=20
<BR><FONT size=3D2>Veritas-bu maillist - =20
Veritas-bu AT mailman.eng.auburn DOT edu</FONT> <BR><FONT size=3D2><A=20
href=3D"http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu"=20
=
target=3D_blank>http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu=
</A></FONT>=20
</P></BLOCKQUOTE></BODY></HTML>
--Boundary_(ID_Z4ci6dLU3njsuey/HQNRUw)--
|
|
|