This is a MIME message. If you are reading this text, you may want to
consider changing to a mail reader or gateway that understands how to
properly handle MIME multipart messages.
--=_59061D55.C1A0CCF4
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Greetings, all.
I'm having a little trouble getting NB to play nice with my Exabyte
10e. I read the doc on installing, and made sure that the files in
/dev/sg and /dev/st were created, and the wizard seems to detect and
install them fine. However, when I attempt to inventory the 'bot, I get
202 errors. The troubleshooting manual wasn't a lot of help.
I can use the /usr/openv/volmgr/bin/robtest utility to initialize the
'bot and move stuff around. Here's the command line and a few outputs:
[root@keane bin]# ./robtest
Configured robots with local control supporting test utilities:
TL8(0) robotic path = /dev/sg/h0c0t3l0
Robot Selection
---------------
1) TL8 0
2) none/quit
Enter choice: 1
Robot selected: TL8(0) robotic path = /dev/sg/h0c0t3l0
Invoking robotic test utility:
/usr/openv/volmgr/bin/tl8test -r /dev/sg/h0c0t3l0 -d1
/dev/st/nh0c0t4l0
Opening /dev/sg/h0c0t3l0
Enter tl8 commands (? returns help information)
init
Initiating INITIALIZE_ELEMENT_STATUS
INITIALIZE_ELEMENT_STATUS complete
m s5 d1
Initiating MOVE_MEDIUM from address 5 to 0
MOVE_MEDIUM complete
So, it appears that my server can communicate with the drive. Is there
something I should set on the 10e, maybe?
TIA,
-dd
--=_59061D55.C1A0CCF4
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
Content-Description: HTML
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1141" name=GENERATOR></HEAD>
<BODY style="MARGIN-TOP: 2px; FONT: 8pt Tahoma; MARGIN-LEFT: 2px">
<DIV><FONT size=2>Greetings, all.<BR> <BR>I'm having a little trouble
getting NB to play nice with my Exabyte 10e. I read the doc on installing, and
made sure that the files in /dev/sg and /dev/st were created, and the wizard
seems to detect and install them fine. However, when I attempt to inventory the
'bot, I get 202 errors. The troubleshooting manual wasn't a lot of help.
<BR> <BR>I can use the /usr/openv/volmgr/bin/robtest utility to initialize
the 'bot and move stuff around. Here's the command line and a few
outputs:<BR> <BR>[root@keane bin]# ./robtest<BR>Configured robots with
local control supporting test utilities:<BR>
TL8(0) robotic path =
/dev/sg/h0c0t3l0<BR> <BR>Robot Selection<BR>---------------<BR>
1) TL8 0<BR> 2) none/quit<BR>Enter choice:
1<BR> <BR>Robot selected: TL8(0) robotic path =
/dev/sg/h0c0t3l0<BR> <BR>Invoking robotic test
utility:<BR>/usr/openv/volmgr/bin/tl8test -r /dev/sg/h0c0t3l0 -d1
/dev/st/nh0c0t4l0<BR> <BR>Opening /dev/sg/h0c0t3l0<BR>Enter tl8 commands
(?
returns help information)<BR>init<BR>Initiating
INITIALIZE_ELEMENT_STATUS<BR>INITIALIZE_ELEMENT_STATUS complete</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2>m s5 d1<BR>Initiating MOVE_MEDIUM from address 5 to
0<BR>MOVE_MEDIUM complete</FONT></DIV>
<DIV> </DIV>
<DIV><FONT size=2> <BR>So, it appears that my server can communicate with
the drive. Is there something I should set on the 10e,
maybe?<BR> <BR>TIA,<BR> <BR>-dd</FONT></DIV></BODY></HTML>
--=_59061D55.C1A0CCF4--
|