Hi,

i have this strange issue with Netbackup DataCenter 3.41.

bp.conf on Master:
[...]
ALLOW_NON_RESERVED_PORTS
CLIENT_PORT_WINDOW = 14000 14100
SERVER_PORT_WINDOW = 14000 14100
[...]

bp.conf on client:
[...]
ALLOW_NON_RESERVED_PORTS
CLIENT_PORT_WINDOW = 14000 14100
[...]

Client does a restore, this are some portions of bprd log:

16:22:10 [11031] <2> getsockconnected: host=MASTERSERVER service=bpdbm 
address=MASTERSERVER-IP protocol=tcp non-reserved port=13721
16:22:10 [11031] <2> getsockconnected: host=CLIENT service=bpcd 
address=CLIENT-IP protocol=tcp reserved port=13782
16:22:10 [11031] <2> getsockconnected: Connect to CLIENT on port 635
16:23:10 [11031] <16> bpcr_connect: bpcr_connect timeout during select after 
60 seconds on port 639
16:23:10 [11031] <16> add_msgs_to_progress_file: timed out connecting to 
CLIENT
16:23:10 [11031] <2> getsockconnected: host=CLIENT service=bpcd 
address=CLIENT-IP protocol=tcp reserved port=13782
16:23:10 [11031] <2> getsockconnected: Connect to CLIENT on port 525
16:24:10 [11031] <16> bpcr_connect: bpcr_connect timeout during select after 
60 seconds on port 632
16:24:10 [11031] <16> add_msgs_to_progress_file: timed out connecting to 
CLIENT
16:24:10 [11031] <2> getsockconnected: host=CLIENT service=bpcd 
address=CLIENT-IP protocol=tcp reserved port=13782
16:24:10 [11031] <2> getsockconnected: Connect to CLIENT on port 790
16:25:10 [11031] <16> bpcr_connect: bpcr_connect timeout during select after 
60 seconds on port 660
16:25:10 [11031] <16> add_msgs_to_progress_file: timed out connecting to 
CLIENT
16:25:10 [11031] <2> getsockconnected: host=MASTERSERVER service=bpdbm 
address=MASTERSERVER-IP protocol=tcp non-reserved port=13721
16:25:10 [11031] <2> getsockconnected: host=CLIENT service=bpcd 
address=CLIENT-IP protocol=tcp reserved port=13782
16:25:10 [11031] <2> getsockconnected: Connect to CLIENT on port 551
16:26:10 [11031] <16> bpcr_connect: bpcr_connect timeout during select after 
60 seconds on port 653
16:26:10 [11031] <16> add_msgs_to_progress_file: timed out connecting to 
CLIENT
16:26:10 [11031] <2> getsockconnected: host=MASTERSERVER service=bpdbm 
address=MASTERSERVER-IP protocol=tcp non-reserved port=13721
16:26:10 [11031] <2> start_mpx_main_bprd: server = MASTERSERVER
16:26:10 [11031] <2> getsockconnected: host=MASTERSERVER service=bpcd 
address=MASTERSERVER-IP protocol=tcp reserved port=13782
16:26:10 [11031] <2> getsockconnected: Connect to MASTERSERVER on port 949

Why the heck do they try low ports ? They can't work due to a paketfilter.

TIA
Arne