[Veritas-bu] problems with an import

David,

  I just ran into a similar thing. There were 2 partial images on the first 
tape, the current week's and the week before, and rest of the current image on 
the second tape. I did the phase 1 and then the phase 2 on the first tape. This 
resulted in a couple errors, "1 of 3 images imported, 2 images not found" or 
something like that. I then ran the Phase 1 on the second tape, then Phase 2 on 
the second tape. The Phase 2 didn't do anything. I re-ran Phase 2 on the first 
tape, which did its thing all over again, except that it mounted the second 
tape and did Phase 2 on that tape also. I was able to do restores from that 
point.

    Bryan

Bryan Bahnmiller
Agilent Technologies, Inc.
1900 Garden of the Gods Road, M/S C103G
Colorado Springs, CO 80907

(719) 590-3262 Tele
www.agilent.com



-----Original Message-----
From: David Markham [mailto:dave.markham AT icl DOT net]
Sent: Tuesday, September 24, 2002 8:10 AM
To: 'Veritas-Bu (E-mail)
Subject: [Veritas-bu] problems with an import


I have just taken 2 tapes from one site to another. Running Netbackup 3.2GA on 
solaris 8 with an L1000.
 
the master Netbackup server is also the media manager server so no problems 
there.
 
I want to import the tapes from site1 to site2 and so did an import selected 
tape id etc.
 
When this finished I pressed the Phase 2 button and selected the tape and image 
and kicked of the import.
 
While this was running I then did a phase 1 on another tape. Now these tapes 
contain a backup of the same client from the same schedule I.e 2 tapes were 
used in the backup. I got an error looking in the log saying :-
 
Import phase 1 started Tue Sep 24 14:45:01 2002
14:45:02 INF - Create DB information for media id DBQ913.
14:45:04 INF - Initiation of bptm process to read media id DBQ913 was successful
.
14:45:05 INF - Waiting for mount of media id DBQ913 on server SERVER.
 
14:46:37 INF - Found existing image information for client CLIENT, class DR_Al
l, and schedule DR_full, done on 09/23/02 23:35:44.
14:46:38 WRN - Cannot import client CLIENT, class DR_All, and schedule DR_full
, copy 1 fragment 3 already exists. Skipping this image.
 
14:46:48 INF - Creation of database information for import of media id DBQ913 co
mplete.

 
Now by phase 2 which I kicked off seems to be hung :-
 
Import phase 2 started Tue Sep 24 14:40:18 2002
14:40:20 INF - Importing class DR_All, schedule DR_full (CLIENT_1032820544), m
edia id DBQ916, created on 09/23/02 23:35:44.
14:40:23 INF - Waiting for mount of media id DBQ916 on server SERVER.
14:41:53 INF - Waiting for positioning of media id DBQ916 on server SERVER.
14:41:55 INF - Beginning import on server SERVER of client CLIENT.

Its just hung there. 
 
Questions :-
 
1. I take it it is dodgy to try and import 2 tapes at the same time??
2. How do i kill the import to start again?
3. I hope it is possible to import these 2 tapes although they contain info on 
the same client and schedule. any ideas ?
 
Thanks
Dave